RadioLocman.com Electronics ru
Advanced Search +
  

Datasheet Texas Instruments TPA2013D1RGPR

Texas Instruments TPA2013D1RGPR

Manufacturer:Texas Instruments
Series:TPA2013D1
Part Number:TPA2013D1RGPR

2.7-W Constant Output Power Mono Class-D Audio Amplifier with Integrated Boost Converter (TPA2013) 20-QFN -40 to 85

Datasheets

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Packaging

Pin20
Package TypeRGP
Industry STD TermVQFN
JEDEC CodeS-PQFP-N
Package QTY3000
CarrierLARGE T&R
Device MarkingBTI
Width (mm)4
Length (mm)4
Thickness (mm).93
Pitch (mm).5
Max Height (mm)1
Mechanical DataDownload »

Parametrics

Approx. Price (US$)0.80 | 1ku
Operating Temperature Range(C)-40 to 85
Output Power(W)2.7
PSRR(dB)95
Package GroupQFN
Package Size: mm2:W x L (PKG)See datasheet (DSBGA)
RatingCatalog
Speaker Amp TypeClass-D Boosted

Eco Plan

RoHSCompliant
Pb FreeYes

Manufacturer's Classification

  • Semiconductors > Audio > Low-Power Audio Amplifiers ( Speaker Amplifier Class AB/Class D

Design Kits & Evaluation Modules

  • Evaluation Modules & Boards: TPA2013D1EVM
    TPA2013D1 Evaluation Module (EVM)
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • Download » Application Notes, PDF, 506 Kb, 03-19-2009
    TPA2013D1 Boost Converter Component Selection
    A common problem in battery-powered systems is the loss of output power as the battery discharges. Output power must be reduced or limited to the level available at minimum battery voltage or distortion becomes unacceptable. It is possible to overcome this problem by using a boost converter, a switching device that boosts battery output to a fixed higher voltage, to power the amplifiers. TI's T
  • Download » Application Notes, PDF, 112 Kb, 12-09-2008
    TPA2013D1 Boost Converter Component Specification
    Loss of output power is a common problem in battery-powered systems as the battery discharges. This problem can be overcome with a boost converter to power the audio power output amplifiers, like the converter and amplifier in the Texas Instruments TPA2013D, a single-chip solution. Passive components used with the converter dramatically affect its operation, so it is necessary to choose these comp
  • Download » Application Notes, PDF, 259 Kb, 11-09-2009
    Filter-Free Class-D Audio Amplifiers
    Traditional Class-D amplifiers lose efficiency if they do not use output LC filters. Texas Instruments offers many Class-D amplifiers that are designated Filter-Free. This means they do not require an output LC filter to maintain high efficiency. However, in some cases an LC or ferrite bead filter is required for EMC.
  • Download » Application Notes, PDF, 140 Kb, Revision: A, 05-01-2013
    AN-1737 Managing EMI in Class D Audio Applications (Rev. A)
    Electromagnetic interference (EMI) is an unwanted disturbance caused in an electrical circuit byelectromagnetic radiation emitted from an external source. The disturbance may interrupt, obstruct, orotherwise degrade the effective performance of the circuit.
  • Download » Application Notes, PDF, 1.9 Mb, Revision: B, 05-01-2013
    AN-1849 An Audio Amplifier Power Supply Design (Rev. B)
    This application report provides design information for a power supply for use with our newest offering of high-performance, ultra high-fidelity audio amplifier input stage ICs.
  • Download » Application Notes, PDF, 765 Kb, 10-30-2001
    Guidelines for Measuring Audio Power Amplifier Performance
    This application note provides guidelines for measuring the date sheet parameters of Texas Instruments audio power amplifiers (APAs) using prefabricated evaluation modules (EVMs). The primary equipment used for the measurements consists of the System Two audio measurement system by Audio Precision , a digital multimeter (DMM), and a dc power supply.
Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus