RadioLocman.com Electronics ru
Advanced Search +
  

Datasheet Linear Technology LTC1100CSW

Manufacturer:Linear Technology
Series:LTC1100
Part Number:LTC1100CSW

Precision, Zero-Drift Instrumentation Amplifier

Datasheets

  • Download » Datasheet, PDF, 143 Kb
    LTC1100 - Precision, Zero-Drift Instrumentation Amplifier
    Docket ↓
    LTC1100
    Precision, Zero-Drift
    Instrumentation Amplifier U DESCRIPTIO FEATURES









    ■ The LTC®1100 is a high precision instrumentation amplifier
    using zero-drift techniques to achieve outstanding DC
    performance. The input DC offset is typically 1µV while
    the DC offset drift is typically 5nV/°C; a very low bias
    current of 65pA is also achieved. Offset Voltage: 10µV Max
    Offset Voltage Drift: 100nV/°C Max
    Bias Current: 65pA Max
    Offset Current: 65pA Max
    Gain Nonlinearity: 20ppm Max
    Gain Error: ±0.075% Max
    CMRR: 90dB ...

Prices

Manufacturer's Classification

  • Signal Conditioning Operational Amplifiers (Op Amps) Precision Amplifiers

Docket:
LTC1100 Precision, Zero-Drift Instrumentation Amplifier
FEATURES DESCRIPTIO Offset Voltage: 10V Max Offset Voltage Drift: 100nV/C Max Bias Current: 65pA Max Offset Current: 65pA Max Gain Nonlinearity: 20ppm Max Gain Error: 0.075% Max CMRR: 90dB 0.1Hz to 10Hz Noise: 1.9VP-P Single 5V Supply Operation 8-Pin MiniDIP The LTC1100 is a high precision instrumentation amplifier using zero-drift techniques to achieve outstanding DC performance. The input DC offset is typically 1V while the DC offset drift is typically 5nV/C; a very low bias current of 65pA is also achieved. The LTC1100 is self-contained; that is, it achieves a differential gain of 100 without any external gain setting resistor or trim pot. The gain linearity is 20ppm and the gain drift is 4ppm/C. The LTC1100 operates from a single 5V supply up to 8V. The output typically swings 300mV from its power supply rails with a 10k load. An optional external capacitor can be added from Pin 7 to Pin 8 to tailor the device's 18kHz bandwidth and to eliminate any unwanted noise pickup. The LTC1100 is also offered in a 16-pin surface mount package with selectable gains of 10 or 100. The LTC1100 is manufactured using Linear Technology's enhanced LTCMOSTM silicon gate process.
, LTC and LT are registered trademarks of Linear Technology Corporation. LTCMOS is a trademark of Linear Technology Corporation APPLICATIO S Thermocouple Amplifiers Strain Gauge Ampli...

Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus