RadioLocman.com Electronics ru
Advanced Search +
  

Datasheet Texas Instruments LM324AN

Texas Instruments LM324AN

Manufacturer:Texas Instruments
Series:LM324A
Part Number:LM324AN

Quadruple Operational Amplifier 14-PDIP 0 to 70

Datasheets

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo

Eco Plan

RoHSCompliant
Pb FreeYes

Parametrics

Additional FeaturesN/A
Approx. Price (US$)0.07 | 1ku
ArchitectureBipolar
CMRR(Min)(dB)65
CMRR(Typ)(dB)80
GBW(Typ)(MHz)1.2
Input Bias Current(Max)(pA)100000
Iq per channel(Max)(mA)0.3
Iq per channel(Typ)(mA)0.175
Number of Channels(#)4
Offset Drift(Typ)(uV/C)7
Operating Temperature Range(C)0 to 70
Output Current(Typ)(mA)40
Package GroupPDIP
Package Size: mm2:W x L (PKG)See datasheet (PDIP)
Rail-to-RailIn to V-
RatingCatalog
Slew Rate(Typ)(V/us)0.5
Total Supply Voltage(Max)(+5V=5, +/-5V=10)32
Total Supply Voltage(Min)(+5V=5, +/-5V=10)3
Vn at 1kHz(Typ)(nV/rtHz)35
Vos (Offset Voltage @ 25C)(Max)(mV)2

Packaging

Pin14
Package TypeN
Industry STD TermPDIP
JEDEC CodeR-PDIP-T
Package QTY25
CarrierTUBE
Device MarkingLM324AN
Width (mm)6.35
Length (mm)19.3
Thickness (mm)3.9
Pitch (mm)2.54
Max Height (mm)5.08
Mechanical DataDownload »

Manufacturer's Classification

Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > General-Purpose Op Amps

Application Notes

  • Download » Application Notes, PDF, 5.8 Mb, Rev. B, 04-23-2013
    Mounting of Surface Mount Components (Rev. B)
    Over the past few years, electronic products, and especially those which fall within the category ofConsumer Electronics, have been significantly reduced in physical size and weight. This documentprovides information about the techniques used to mount CSP size components.
  • Download » Application Notes, PDF, 798 Kb, 05-14-2004
    AN-666 DTMF Generation with 3.58 MHz Crystal
  • Download » Application Notes, PDF, 183 Kb, Rev. B, 04-30-2013
    CMOS ADC Interfaces Easily with many Microprocessors (Rev. B)
    To help meet the rising demand for easier interfacing between analog-to-digital converters and microprocessors, the complementary MOS, 8-bit ADC0801-05 has been designed to accommodate almost all of today's popular microprocessors. It requires only a single 5 V supply and is low power to boot. With a span accommodation down to 180 mV, this 8-bit unit can also replace a 12-bit analog-to-digital dev
  • Download » Application Notes, PDF, 371 Kb, Rev. B, 04-23-2013
    AN-C V/F Converter ICs Handle Frequency-to-Voltage Needs (Rev. B)
    Simplify your frequency-to-voltage (F/V) converter designs with versatile V/F ICs. Starting with a basicconverter circuit, you can modify it to meet almost any application requirement. You can spare yourselfsome hard labor when designing F/V converters by using a voltage-to-frequency (V/F) IC in your designs.These ICs form the basis of a series of accurate, yet economical, F/V converters sui
  • Download » Application Notes, PDF, 91 Kb, 10-02-2002
    Get More Power Out of Dual or Quad Op-Amps
  • Download » Application Notes, PDF, 165 Kb, Rev. A, 04-26-2013
    AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A)
    It is well known to analog experts that you can use the positive and negative inputs of an operationalamplifier to make a high-impedance current source (current pump) using a conventional operationalamplifier (op amp). This basic circuit can put out both + and - output current (or zero current) into variousloads. The theory is simple. But the practical problems involved are not so simple or
  • Download » Application Notes, PDF, 81.7 Mb, Rev. B, 04-22-2013
    Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)
    This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits.
  • Download » Application Notes, PDF, 814 Kb, Rev. A, 05-06-2013
    AN-103 LM340 Series Three Terminal Positive Regulators (Rev. A)
    The LM340-XX are three terminal 1.0A positive voltage regulators, with preset output voltages of 5.0V or15V. The LM340 regulators are complete 3-terminal regulators requiring no external components fornormal operation. However, by adding a few parts, one may improve the transient response, provide for avariable output voltage, or increase the output current. Included on the chip are all of t
Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus