Datasheet Texas Instruments LM358N/NOPB

ManufacturerTexas Instruments
SeriesLM358-N
Part NumberLM358N/NOPB
Datasheet Texas Instruments LM358N/NOPB

Low Power Dual Operational Amplifier 8-PDIP 0 to 70

Datasheets

LMx58-N Low-Power, Dual-Operational Amplifiers datasheet
PDF, 1.9 Mb, Revision: I, File published: Dec 30, 2014
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Packaging

Pin88
Package TypePP
Industry STD TermPDIPPDIP
JEDEC CodeR-PDIP-TR-PDIP-T
Package QTY4040
CarrierTUBETUBE
Device MarkingLM358N
Width (mm)6.356.35
Length (mm)9.819.81
Thickness (mm)3.93.9
Pitch (mm)2.542.54
Max Height (mm)5.085.08
Mechanical DataDownloadDownload

Parametrics

Additional FeaturesN/A
ArchitectureBipolar
CMRR(Min)65 dB
CMRR(Typ)85 dB
GBW(Typ)1 MHz
IIB(Max)100000 pA
Iq per channel(Max)0.6 mA
Iq per channel(Typ)0.25 mA
Number of Channels2
Offset Drift(Typ)7 uV/C
Operating Temperature Range0 to 70 C
Output Current(Typ)20 mA
Package GroupPDIP
Package Size: mm2:W x LSee datasheet (PDIP) PKG
Rail-to-RailIn to V-
RatingCatalog
Slew Rate(Typ)0.1 V/us
Total Supply Voltage(Max)32 +5V=5, +/-5V=10
Total Supply Voltage(Min)3 +5V=5, +/-5V=10
Vn at 1kHz(Typ)40 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)3 mV

Eco Plan

RoHSCompliant

Application Notes

  • AN-298 Isolation Techniques for Signal Conditioning (Rev. B)
    PDF, 685 Kb, Revision: B, File published: May 6, 2013
    This application note provides information and examples of isolation techniques for signal conditioning.
  • Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)
    PDF, 81.7 Mb, Revision: B, File published: Apr 22, 2013
    This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits.
  • AN-C V/F Converter ICs Handle Frequency-to-Voltage Needs (Rev. B)
    PDF, 371 Kb, Revision: B, File published: Apr 23, 2013
    Simplify your frequency-to-voltage (F/V) converter designs with versatile V/F ICs. Starting with a basicconverter circuit you can modify it to meet almost any application requirement. You can spare yourselfsome hard labor when designing F/V converters by using a voltage-to-frequency (V/F) IC in your designs.These ICs form the basis of a series of accurate yet economical F/V converters sui
  • AN-116 Use the LM158/LM258/LM358 Dual Single Supply Op Amp (Rev. B)
    PDF, 313 Kb, Revision: B, File published: Apr 23, 2013
    This application note discusses the use of the LM158/LM258/LM358 dual op amp when operated from asingle supply.
  • Using ADC0808/809 8-Bit uP Compble ADCs w/8-Chan Analog Multiplexr (Rev. B)
    PDF, 1.4 Mb, Revision: B, File published: Apr 22, 2013
    This application note discusses the use of the ADC0808/ADC0809 Data Acquisition Devices (DAD) withan 8-channel analog multiplexer.
  • AN-284 Single-Supply Applications of CMOS MICRODACs (Rev. B)
    PDF, 271 Kb, Revision: B, File published: Apr 22, 2013
    CMOS data acquisition and conversion products are becoming the ideal choice for microprocessorcontrolled analog systems. The use of CMOS allows the addition of more digital logic functionality on tothe same die as the analog circuitry to minimize external parts requirements. The inherently low powerconsumption is also a big factor for battery operation and low heat generation in large scale
  • Applications of the LM3524 Pulse Width Modulator (Rev. B)
    PDF, 549 Kb, Revision: B, File published: Apr 23, 2013
    The LM3524 regulating pulse-width-modulator (PWM) is commonly used as the control element inswitching regulator power supplies. This is in keeping with its intended purpose. Engineers closelyassociate this part with switching power supplies. Nevertheless, the flexible combination of elements (seebox) within the LM3524 also allows it to be used in a number of other applications outside the po

Model Line

Manufacturer's Classification

  • Semiconductors > Space & High Reliability > Amplifier > Operational Amplifiers
EMS supplier