Datasheet Texas Instruments CC1110F32RHHR

ManufacturerTexas Instruments
SeriesCC1110-CC1111
Part NumberCC1110F32RHHR
Datasheet Texas Instruments CC1110F32RHHR

Sub-1 GHz wireless MCU with up to 32 kB Flash memory 36-VQFN -40 to 85

Datasheets

True System-on-Chip with Low-Power RF Transceiver and 8051 MCU datasheet
PDF, 3.6 Mb, Revision: H, File published: Jul 10, 2013
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Packaging

Pin3636
Package TypeRHHRHH
Industry STD TermVQFNVQFN
JEDEC CodeS-PQFP-NS-PQFP-N
Package QTY25002500
CarrierLARGE T&RLARGE T&R
Device MarkingCC1110F32
Width (mm)66
Length (mm)66
Thickness (mm).9.9
Pitch (mm).5.5
Max Height (mm)11
Mechanical DataDownloadDownload

Parametrics

ADC Resolution12 Bits
CPU8051
Device TypeWireless MCU
FlashUp to 32 KB
GPIO21
Operating Temperature Range-40 to 85,0 to 85 C
Package GroupVQFN
RAM4 KB
Standby Current0.3 uA
Technology433 MHz Band,868 MHz Band,915 MHz Band

Eco Plan

RoHSCompliant

Design Kits & Evaluation Modules

  • Development Kits: SOC-BB
    Battery Board for System-on-Chips
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: CC1110-CC1111DK
    CC1110 and CC1111 Development Kit
    Lifecycle Status: Active (Recommended for new designs)
  • JTAG Emulators/ Analyzers: CC-DEBUGGER
    Debugger and Programmer for RF System-on-Chips
    Lifecycle Status: Active (Recommended for new designs)
  • Daughter Cards: CC1110EMK433
    CC1110 Evaluation Module 433MHz
    Lifecycle Status: Active (Recommended for new designs)
  • Daughter Cards: CC1110EMK868-915
    CC1110 Evaluation Module 868-915MHz
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • DN118 -- Porting SimpliciTI to the SmartRF CCxx10 Target Board
    PDF, 308 Kb, File published: Dec 1, 2009
    This design note describes how one can easily port the existing SimpliciTI examples to the SmartRF CCxx10 Target Board.
  • AN082 -- One Way and Two-Way Audio Communications using the CC1110 or CC2 (Rev. A)
    PDF, 905 Kb, Revision: A, File published: Sep 30, 2010
  • AN101 - Bootloader for CC2510/11 and CC1110/1111 Soc(System-on-Chip) Transceiver (Rev. A)
    PDF, 868 Kb, Revision: A, File published: Sep 8, 2011
  • DN109 -- Using I2S in CC111xFx and CC251xFx
    PDF, 202 Kb, File published: Jun 9, 2008
    This design note describes the key elements and simple usage of the industry standard I2S peripheral. The main objective is to explain the CC111xFx/CC251xFx software configuration required to operate the I2S and to transfer digital audio with and without DMA support.
  • DN119 -- Asynchronous Serial Mode for CC111xFx and CC251xFx (Rev. A)
    PDF, 152 Kb, Revision: A, File published: Mar 21, 2012
  • AN099 - Wireless Microphone with USB Interface
    PDF, 565 Kb, File published: Jun 1, 2011
  • AN080 -- LED Lighting with Remote Control using CC2510 and CC1110
    PDF, 765 Kb, File published: Sep 16, 2009
    This note describes a LED lighting design based on CC2510 and TPS40211. CC2510 is 2.4GHz System-on-Chip Low Power RF Transceiver while TPS40211 is a wide input range current mode boost controller, which provides voltage regulation and support 8 LED in series. CC2510 provides the wireless control function including 16 steps dimmer and various flashing modes. The CC1110 is the sub 1GHz version of th
  • DN110 -- Main Radio Control State Transition Times
    PDF, 136 Kb, File published: Jul 10, 2008
    This design note explains the variations of the state transition timings of the internal state machine called main radio controller (MARC) for non-standard usage of the radio peripheral. Furthermore the adjustment of the frequency synthesizer calibration time is explained.
  • AN096 Using CC1190 Front End with CC1101 under FCC 15.247 (Rev. A)
    PDF, 563 Kb, Revision: A, File published: May 2, 2011
  • DN101 -- Using the ADC to Measure Supply Voltage (Rev. A)
    PDF, 74 Kb, Revision: A, File published: Oct 22, 2007
    This design note includes descriptions and a code example for easily measuring the supply voltage of a device by using the internal ADC. The code is only suitable for the CC1110, CC1111, CC2430, CC2431, CC2510 and CC2511 system on chip (SOC) devices.
  • DN102 -- SoC Temperature Sensor (Rev. A)
    PDF, 91 Kb, Revision: A, File published: Oct 22, 2007
    This design note includes descriptions and a code example for easily measuring the temperature of a device by using the internal temperature sensor connected to the ADC. The code is suitable for the CC1110, CC1111, CC2430, CC2431, CC2510 and CC2511 system on chip (SOC) devices.
  • DN106 -- Power Modes in CC111xFx, CC243xFx, and CC251xFx (Rev. B)
    PDF, 177 Kb, Revision: B, File published: Feb 23, 2009
  • DN115 -- Using PWM for Dimmer Function in LED Lighting
    PDF, 89 Kb, File published: Jun 16, 2009
  • DN114 -- Test_Signals_for_Debug_Purpose in CC111xFx, CC251xFx, and CC243x (Rev. A)
    PDF, 55 Kb, Revision: A, File published: Dec 11, 2008
    DN114 - Test_Signals_for_Debug_Purpose in CC111xFx, CC251xFx, and CC243x
  • DN107 -- DMA and Radio Configuration (Rev. A)
    PDF, 859 Kb, Revision: A, File published: Dec 17, 2009
  • AN105 -- Using 1W RF3858 Front End with CC1101 Under FCC 15.247 (Rev. A)
    PDF, 983 Kb, Revision: A, File published: Aug 3, 2011
  • DN025 -- Johanson Technology Matched Balun Filters (Rev. A)
    PDF, 609 Kb, Revision: A, File published: Oct 13, 2011
  • DN006 -- CC11xx Settings for FCC15.247 Solutions (Rev. B)
    PDF, 105 Kb, Revision: B, File published: Aug 17, 2010
  • AN094 -- Using the CC1190 Front End with CC1101 under EN 300 220
    PDF, 371 Kb, File published: Jan 11, 2011
  • DN036 -- CC1101+CC1190 600 kbps Data Rate, +19 dBm Transmit (Rev. A)
    PDF, 139 Kb, Revision: A, File published: Nov 7, 2011
  • DN017 -- CC11xx 868/915 MHz RF Matching (Rev. A)
    PDF, 328 Kb, Revision: A, File published: Mar 31, 2008
    There are three versions of the CC11xx reference design which have been published. This design note gives a short introduction to RF matching and important aspects when designing products using the CC11xx parts and discusses the differences between the three reference design revisions.
  • DN112 -- Using UART in CC111xFx CC243x CC251xFx and CC253xFx (Rev. B)
    PDF, 210 Kb, Revision: B, File published: Aug 11, 2009
    This design note describes the key elements and simple usage of the CC111xFx/CC243xFx/CC251xFx/CC253xFx USART peripheral in UART mode. The main objective is to explain the CC111xFx/CC243xFx/CC251xFx/CC253xFx software required to operate the UART, with and without DMA support.
  • DN117 -- SimpliciTI-compatible UART Driver
    PDF, 605 Kb, File published: Sep 22, 2009
  • DN116 -- Clearing Module Interrupt Flags in LPW SoC Devices
    PDF, 211 Kb, File published: Aug 3, 2009
  • DN113 CC111xFx CC243xFx CC251xFx CC253xFx SPI Interface (Rev. A)
    PDF, 133 Kb, Revision: A, File published: Aug 11, 2009
    The purpose of this design note is to describe how to operate the two USARTs in synchronous SPI mode, both as a master and as a slave.
  • DN111 - Current Consumption for a Polling Receiver (Rev. A)
    PDF, 687 Kb, Revision: A, File published: Mar 24, 2009
  • DN505 -- RSSI interpretation and timing (Rev. D)
    PDF, 129 Kb, Revision: D, File published: Jun 16, 2010
  • AN050 -- Using the CC1101 in the European 868MHz SRD band (Rev. B)
    PDF, 223 Kb, Revision: B, File published: Sep 11, 2009
  • DN508 -- Frequency Scanning using CC430Fx, CC110x, and CC111xFx
    PDF, 65 Kb, File published: Jan 25, 2010
    The purpose of this design note is to show the necessary steps to successfully scan through a frequency band covering n numbers of channels, and find the strongest signal in the band.
  • DN005 -- CC11xx Sensitivity versus Frequency Offset and Crystal Accuracy (Rev. C)
    PDF, 96 Kb, Revision: C, File published: Aug 20, 2009
  • DN022 -- CC110x CC111x OOK ASK Register Settings (Rev. E)
    PDF, 532 Kb, Revision: E, File published: Mar 8, 2012
  • DN504 -- FEC Implementation (Rev. A)
    PDF, 110 Kb, Revision: A, File published: Oct 22, 2007
    This design note explains the functionality of forward error correction (FEC) and how it is used in the CC1100, CC1101, CC1110, CC1111, CC1150, CC2500, CC2510, CC2511, and CC2550 devices. Example code for FEC implementation is included.
  • DN032 -- Options for Cost Optimized CC11xx Matching
    PDF, 112 Kb, File published: Aug 25, 2010
  • DN016 -- Compact Antenna Solution for 868/915 MHz (Rev. B)
    PDF, 832 Kb, Revision: B, File published: Aug 20, 2009
  • DN019 -- Powering Low-Power RF Products (Rev. B)
    PDF, 327 Kb, Revision: B, File published: Sep 18, 2009
  • DN507 -- FEC Decoding
    PDF, 264 Kb, File published: Jan 28, 2010
    The purpose of this design note is to show how the FEC decoding implemented in HW on the CC1100, CC1100E, CC1101, CC1110Fx, CC1111Fx, CC1150, CC2500, CC2510Fx, CC2511Fx, and CC2550 can be implemented in SW. This is in particular very important for the CC430Fx device, which has the same radio as the CC1101 and CC1110/11Fx but without HW FEC included.
  • DN024 -- 868 MHz, 915 MHz and 955 MHz Monopole PCB Antenna (Rev. E)
    PDF, 1.0 Mb, Revision: E, File published: Feb 22, 2013
  • DN502 -- CRC Implementation (Rev. D)
    PDF, 55 Kb, Revision: D, File published: Oct 27, 2009
  • AN001 -- SRD regulations for license free transceiver operation
    PDF, 260 Kb, File published: Feb 1, 2006
  • DN033 - Mitsubishi Ceramic Antenna for 868 MHz, 915 MHz & 955 (Rev. A)
    PDF, 685 Kb, Revision: A, File published: Sep 14, 2010
  • DN023 -- 868 MHz, 915 MHz and 955 MHz Inverted F Antenna (Rev. C)
    PDF, 369 Kb, Revision: C, File published: Aug 30, 2011
  • AN028 -- LC Filter with Improved High-Frequency Attenuation
    PDF, 254 Kb, File published: Feb 1, 2006
    AN028 -- Improved LC Filter
  • AN014 -- Frequency Hopping Systems
    PDF, 210 Kb, File published: Feb 1, 2006
  • AN021 -- Voltage Level Conversion
    PDF, 212 Kb, File published: Feb 1, 2006
  • DN011 -- RF Module Testing using SmartRF Studio (Rev. A)
    PDF, 325 Kb, Revision: A, File published: Mar 23, 2009
  • DN018 -- Range Measurements in an Open Field Environment (Rev. A)
    PDF, 607 Kb, Revision: A, File published: Apr 15, 2008
    This design note is a general description of how to set up open field range measurements and what has to be considered. Applies to all low power RF-ICs.
  • DN002 -- Practical Sensitivity Testing
    PDF, 364 Kb, File published: Dec 20, 2006
  • AN003 -- SRD Antennas
    PDF, 358 Kb, File published: Feb 1, 2006
  • DN000 - Design Note Overview (Rev. T)
    PDF, 126 Kb, Revision: T, File published: Oct 12, 2011
  • DN031 -- CC-Antenna-DK Documentation and Antenna Measurements Summary
    PDF, 2.3 Mb, File published: Aug 26, 2010
    DN031 -- Design Notes
  • AN058 -- Antenna Selection Guide (Rev. B)
    PDF, 1.8 Mb, Revision: B, File published: Oct 6, 2010
  • DN035 -- Antenna Quick Guide (Rev. A)
    PDF, 138 Kb, Revision: A, File published: Feb 12, 2013

Model Line

Manufacturer's Classification

  • Semiconductors > Microcontrollers (MCU) > SimpleLink MCUs > SimpleLink wireless MCUs > SimpleLink CC131x Sub-1 GHz
EMS supplier