Datasheet Texas Instruments LMH6626

ManufacturerTexas Instruments
SeriesLMH6626
Datasheet Texas Instruments LMH6626

Single/ Dual Ultra Low Noise Wideband Operational Amplifier

Datasheets

LMH6624 and LMH6626 Single/Dual Ultra Low Noise Wideband Operational Amplifier datasheet
PDF, 1.9 Mb, Revision: G, File published: Dec 19, 2014
Extract from the document

Prices

Status

LMH6626MA/NOPBLMH6626MAX/NOPBLMH6626MM/NOPBLMH6626MMX/NOPB
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityNoYesNoYes

Packaging

LMH6626MA/NOPBLMH6626MAX/NOPBLMH6626MM/NOPBLMH6626MMX/NOPB
N1234
Pin8888
Package TypeDDDGKDGK
Industry STD TermSOICSOICVSSOPVSSOP
JEDEC CodeR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-G
Package QTY95250010003500
CarrierTUBELARGE T&RSMALL T&RLARGE T&R
Device Marking26MALMH66A98AA98A
Width (mm)3.913.9133
Length (mm)4.94.933
Thickness (mm)1.581.58.97.97
Pitch (mm)1.271.27.65.65
Max Height (mm)1.751.751.071.07
Mechanical DataDownloadDownloadDownloadDownload

Parametrics

Parameters / ModelsLMH6626MA/NOPB
LMH6626MA/NOPB
LMH6626MAX/NOPB
LMH6626MAX/NOPB
LMH6626MM/NOPB
LMH6626MM/NOPB
LMH6626MMX/NOPB
LMH6626MMX/NOPB
2nd Harmonic, dBc656565
2nd Harmonic(dBc)65
3rd Harmonic, dBc808080
3rd Harmonic(dBc)80
@ MHz10101010
Acl, min spec gain, V/V101010
Acl, min spec gain(V/V)10
Additional FeaturesDecompensatedDecompensatedDecompensatedDecompensated
Approx. Price (US$)2.64 | 1ku
ArchitectureBipolar,Voltage FBBipolar,Voltage FBBipolar,Voltage FBBipolar
Voltage FB
BW @ Acl, MHz808080
BW @ Acl(MHz)80
CMRR(Min), dB878787
CMRR(Min)(dB)87
CMRR(Typ), dB959595
CMRR(Typ)(dB)95
GBW(Typ), MHz160016001600
GBW(Typ)(MHz)1600
Input Bias Current(Max), pA200000002000000020000000
Input Bias Current(Max)(pA)20000000
Iq per channel(Max), mA161616
Iq per channel(Max)(mA)16
Iq per channel(Typ), mA121212
Iq per channel(Typ)(mA)12
Number of Channels222
Number of Channels(#)2
Offset Drift(Typ), uV/C0.250.250.25
Offset Drift(Typ)(uV/C)0.25
Operating Temperature Range, C-40 to 125-40 to 125-40 to 125
Operating Temperature Range(C)-40 to 125
Output Current(Typ), mA100100100
Output Current(Typ)(mA)100
Package GroupSOICSOICVSSOPVSSOP
Package Size: mm2:W x L, PKG8SOIC: 29 mm2: 6 x 4.9(SOIC)8SOIC: 29 mm2: 6 x 4.9(SOIC)8VSSOP: 15 mm2: 4.9 x 3(VSSOP)
Package Size: mm2:W x L (PKG)8VSSOP: 15 mm2: 4.9 x 3(VSSOP)
Rail-to-RailNoNoNoNo
RatingCatalogCatalogCatalogCatalog
Slew Rate(Typ), V/us360360360
Slew Rate(Typ)(V/us)360
Total Supply Voltage(Max), +5V=5, +/-5V=10121212
Total Supply Voltage(Max)(+5V=5, +/-5V=10)12
Total Supply Voltage(Min), +5V=5, +/-5V=10555
Total Supply Voltage(Min)(+5V=5, +/-5V=10)5
Vn at 1kHz(Typ), nV/rtHz111
Vn at Flatband(Typ), nV/rtHz111
Vn at Flatband(Typ)(nV/rtHz)1
Vos (Offset Voltage @ 25C)(Max), mV0.50.50.5
Vos (Offset Voltage @ 25C)(Max)(mV)0.5

Eco Plan

LMH6626MA/NOPBLMH6626MAX/NOPBLMH6626MM/NOPBLMH6626MMX/NOPB
RoHSCompliantCompliantCompliantCompliant
Pb FreeYes

Application Notes

  • AN-1604 Decompensated Operational Amplifiers (Rev. B)
    PDF, 206 Kb, Revision: B, File published: May 1, 2013
    This application report discusses the what, why, and where of decompensated op amps. This applicationreport also describes external compensation techniques, such as reducing loop gain, to stabilize op ampsoperated at gains less than the minimum stable gain specified in the datasheet. A comprehensivetreatment of input lead-lag compensation including examples is presented.
  • OA-14 Improving Amplifier Noise for High 3rd Intercept Amplifiers (Rev. F)
    PDF, 594 Kb, Revision: F, File published: May 1, 2013
    This application report discusses improving Amplifier Noise for High 3rd Intercept Amplifiers.
  • Transimpedance Amplifiers (TIA): Choosing the Best Amplifier for the job (Rev. A)
    PDF, 153 Kb, Revision: A, File published: May 16, 2017
    This application note is intended as a guide for the designer looking to amplify the small signal from a photodiode or avalanche diode so that it would be large enough for further processing (e.g. data acquisition) or to trigger some other event in a system. The challenge in doing so, as always, is to not degrade the signal such that it becomes indistinguishable from random noi
  • OA-15 Frequent Faux Pas in Applying Wideband Current Feedback Amplifiers (Rev. C)
    PDF, 365 Kb, Revision: C, File published: Apr 17, 2013
    As op amp operating speeds have moved to ever higher frequencies, a whole new set of design concernshave come into play for linear op amp applications. With the development of the current feedbacktopology, design concerns unique to that topology must also be considered if optimal performance is to beachieved from devices offering over 200 MHz в€’3 dB bandwidths. This application report reviews

Model Line

Manufacturer's Classification

  • Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> High-Speed Op Amps (>=50MHz)
EMS supplier