Datasheet Texas Instruments MSP430FR5857

ManufacturerTexas Instruments
SeriesMSP430FR5857
Datasheet Texas Instruments MSP430FR5857

MSP430FR5857 16 MHz Ultra-Low-Power Microcontroller featuring 32 KB FRAM, 1 KB SRAM, 33 IO

Datasheets

MSP430FR58xx Mixed-Signal Microcontrollers datasheet
PDF, 2.6 Mb, Revision: D, File published: Mar 9, 2017
Extract from the document

Prices

Status

MSP430FR5857IDAMSP430FR5857IDARMSP430FR5857IRHARMSP430FR5857IRHAT
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityNoNoNoNo

Packaging

MSP430FR5857IDAMSP430FR5857IDARMSP430FR5857IRHARMSP430FR5857IRHAT
N1234
Pin38384040
Package TypeDADARHARHA
Industry STD TermTSSOPTSSOPVQFNVQFN
JEDEC CodeR-PDSO-GR-PDSO-GS-PQFP-NS-PQFP-N
Package QTY4020002500250
CarrierTUBELARGE T&RLARGE T&RSMALL T&R
Device MarkingFR5857FR5857FR5857FR5857
Width (mm)6.26.266
Length (mm)12.512.566
Thickness (mm)1.151.15.9.9
Pitch (mm).65.65.5.5
Max Height (mm)1.21.211
Mechanical DataDownloadDownloadDownloadDownload

Parametrics

Parameters / ModelsMSP430FR5857IDA
MSP430FR5857IDA
MSP430FR5857IDAR
MSP430FR5857IDAR
MSP430FR5857IRHAR
MSP430FR5857IRHAR
MSP430FR5857IRHAT
MSP430FR5857IRHAT
ADCADC12 - 14chADC12 - 14chADC12 - 14chADC12 - 14ch
AESN/AN/AN/AN/A
Active Power, uA/MHz101.25101.25101.25101.25
Additional FeaturesReal-Time Clock,Watchdog,Temp Sensor,Brown Out Reset,IrDAReal-Time Clock,Watchdog,Temp Sensor,Brown Out Reset,IrDAReal-Time Clock,Watchdog,Temp Sensor,Brown Out Reset,IrDAReal-Time Clock,Watchdog,Temp Sensor,Brown Out Reset,IrDA
BSLUARTUARTUARTUART
CPUMSP430MSP430MSP430MSP430
Comparators16161616
DMA3333
Featuredfr5fr5fr5fr5
Frequency, MHz16161616
GPIO Pins33333333
I2C1111
Max VCC3.63.63.63.6
Min VCC1.81.81.81.8
Multiplier32x3232x3232x3232x32
Non-volatile Memory, KB32323232
Operating Temperature Range, C-40 to 85-40 to 85-40 to 85-40 to 85
Package GroupTSSOPTSSOPVQFNVQFN
Package Size: mm2:W x L, PKG38TSSOP: 101 mm2: 8.1 x 12.5(TSSOP)38TSSOP: 101 mm2: 8.1 x 12.5(TSSOP)40VQFN: 36 mm2: 6 x 6(VQFN)40VQFN: 36 mm2: 6 x 6(VQFN)
RAM, KB1111
RatingCatalogCatalogCatalogCatalog
SPI3333
Security EnablerCryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protectionCryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protectionCryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protectionCryptographic acceleration,Debug security,Physical security,Secure FW and SW update,Software IP protection
Special I/ON/AN/AN/AN/A
Standby Power, LPM3-uA0.50.50.50.5
Timers - 16-bit5555
UART2222
Wakeup Time, us7777

Eco Plan

MSP430FR5857IDAMSP430FR5857IDARMSP430FR5857IRHARMSP430FR5857IRHAT
RoHSCompliantCompliantCompliantCompliant

Application Notes

  • Migrating From MSP430F4xx Family to MSP430FR58xx/FR59xx/FR68xx/FR69xx Family (Rev. B)
    PDF, 183 Kb, Revision: B, File published: Nov 3, 2016
    This application report enables easy migration from MSP430F4xx flash-based MCUs to the MSP430FR58xx/59xx/68xx/69xx family of FRAM-based MCUs. The intent is to highlight key differences between the two families. For more information on the use of the MSP430FR58xx/FR59xx/68xx/69xx devices, see the MSP430FR58xx, MSP430FR59xx, MSP430FR68xx, and MSP430FR69xx Family User's Guide.
  • Getting Started With EEMBC ULPBench on MSP-EXP430FR5969 (Rev. A)
    PDF, 381 Kb, Revision: A, File published: Jan 29, 2015
    This is a getting started guide for obtaining the ULPMarkв„ў-CP score using the Embedded Microprocessor Benchmark Consortium (EEMBC) ULPBench and EnergyMonitor with the MSP430FR5969 microcontroller (MCU). This document uses the MSP-EXP430FR5969 LaunchPad development kit as the target evaluation module (EVM) for performing the benchmark.
  • MSP430 Advanced Power Optimizations: ULP Advisor SW and EnergyTrace Technology
    PDF, 4.0 Mb, File published: Jun 9, 2014
    MSP430 microcontrollers are designed specifically for ultra-low-power applications. Features such as multiple low-power modes, instant wakeup, intelligent autonomous peripherals, and much more to enable such ultra-low-power capabilities. Texas Instruments provides valuable tools to help the programmer fully use these benefits and optimize power consumption of the target application. This app
  • Designing With the MSP430FR58xx, FR59xx, FR68xx, and FR69xx ADC (Rev. A)
    PDF, 137 Kb, Revision: A, File published: Mar 30, 2016
    Designing an application with the analog-to-digital converter (ADC) requires several considerations to optimize for power and performance. This application report discusses the basics of how you would analyze a data sheet and user's guide to design your application. It goes into the fundamentals of how to optimize your design based on the external requirements and available ADC configurations. The
  • MSP430 FRAM Technology – How To and Best Practices
    PDF, 326 Kb, File published: Jun 23, 2014
    FRAM is a non-volatile memory technology that behaves similar to SRAM while enabling a whole host of new applications, but also changing the way firmware should be designed. This application report outlines the how to and best practices of using FRAM technology in MSP430 from an embedded software development perspective. It discusses how to implement a memory layout according to application-specif
  • MSP430 FRAM Quality and Reliability (Rev. A)
    PDF, 295 Kb, Revision: A, File published: May 1, 2014
    FRAM is a nonvolatile embedded memory technology and is known for its ability to be ultra-low power while being the most flexible and easy-to-use universal memory solution available today. This application report is intended to give new FRAM users and those migrating from flash-based applications knowledge on how FRAM meets key quality and reliability requirements such as data retention and endura
  • Migrating from the MSP430F5xx,F6xx Family to the MSP430FR58xx/FR59xx/68xx Family (Rev. D)
    PDF, 151 Kb, Revision: D, File published: Nov 3, 2016
    This application report helps enable easy migration from MSP430F5xx and MSP430F6xx flash-based MCUs to the MSP430FR58xx/FR59xx/68xx/69xx FRAM-based MCUs. For the migration guide to MSP430FR57xx, see Migrating From the MSP430F2xx Family to the MSP430FR57xx Family. It covers programming, system, and peripheral considerations when migrating firmware. The intent is to highlight differences between the
  • Migrating from the MSP430F2xx,G2xx Family to the MSP430FR58xx/FR59xx/68xx/69xx (Rev. E)
    PDF, 179 Kb, Revision: E, File published: Nov 3, 2016
    This application report enables easy migration from MSP430F2xx flash-based MCUs to the MSP430FR58xx/FR59xx/68xx/69xx family of FRAM-based MCUs. For the migration guide to MSP430FR57xx, see Migrating From the MSP430F2xx Family to the MSP430FR57xx Family. It covers programming, system, and peripheral considerations when migrating firmware. The intent is to highlight key differences between the two f
  • General Oversampling of MSP ADCs for Higher Resolution (Rev. A)
    PDF, 551 Kb, Revision: A, File published: Apr 1, 2016
    Multiple MSP ultra-low-power microcontrollers offer analog-to-digital converters (ADCs) to convert physical quantities into digital numbers, a function that is widely used across numerous applications. There are times, however, when a customer design demands a higher resolution than the ADC of the selected MSP can offer. This application report, which is based on the previously-published Oversampl

Model Line

Manufacturer's Classification

  • Semiconductors> Microcontrollers (MCU)> MSP430 ultra-low-power MCUs> MSP430FRxx FRAM
EMS supplier