Datasheet Texas Instruments REF1004-1.2

ManufacturerTexas Instruments
SeriesREF1004-1.2
Datasheet Texas Instruments REF1004-1.2

Micropower Voltage Reference

Datasheets

Micropower Voltage Reference datasheet
PDF, 248 Kb, File published: Sep 27, 2000
Extract from the document

Prices

Status

REF1004C-1.2REF1004C-1.2/2K5REF1004I-1.2REF1004I-1.2/2K5REF1004I-1.2/2K5E4REF1004I-1.2E4
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityYesYesNoNoNoNo

Packaging

REF1004C-1.2REF1004C-1.2/2K5REF1004I-1.2REF1004I-1.2/2K5REF1004I-1.2/2K5E4REF1004I-1.2E4
N123456
Pin888888
Package TypeDDDDDD
Industry STD TermSOICSOICSOICSOICSOICSOIC
JEDEC CodeR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-G
Package QTY752500752500250075
CarrierTUBELARGE T&RTUBELARGE T&RLARGE T&RTUBE
Device Marking0412REF0412REFREFREF
Width (mm)3.913.913.913.913.913.91
Length (mm)4.94.94.94.94.94.9
Thickness (mm)1.581.581.581.581.581.58
Pitch (mm)1.271.271.271.271.271.27
Max Height (mm)1.751.751.751.751.751.75
Mechanical DataDownloadDownloadDownloadDownloadDownloadDownload

Parametrics

Parameters / ModelsREF1004C-1.2
REF1004C-1.2
REF1004C-1.2/2K5
REF1004C-1.2/2K5
REF1004I-1.2
REF1004I-1.2
REF1004I-1.2/2K5
REF1004I-1.2/2K5
REF1004I-1.2/2K5E4
REF1004I-1.2/2K5E4
REF1004I-1.2E4
REF1004I-1.2E4
Initial Accuracy(Max), %0.30.30.30.30.30.3
Iout/Iz(Max), mA202020202020
Min Iz for Regulation, uA888888
Operating Temperature Range, C-40 to 85,0 to 70-40 to 85,0 to 70-40 to 85,0 to 70-40 to 85,0 to 70-40 to 85,0 to 70-40 to 85,0 to 70
Package GroupSOICSOICSOICSOICSOICSOIC
Package Size: mm2:W x L, PKG8SOIC: 29 mm2: 6 x 4.9(SOIC)8SOIC: 29 mm2: 6 x 4.9(SOIC)8SOIC: 29 mm2: 6 x 4.9(SOIC)8SOIC: 29 mm2: 6 x 4.9(SOIC)8SOIC: 29 mm2: 6 x 4.9(SOIC)8SOIC: 29 mm2: 6 x 4.9(SOIC)
Pin/Package8SOIC8SOIC8SOIC8SOIC8SOIC8SOIC
RatingCatalogCatalogCatalogCatalogCatalogCatalog
Reference VoltageFixedFixedFixedFixedFixedFixed
Temp Coeff(Typ), ppm/ degree C202020202020
VO, V1.21.21.21.21.21.2
VO Adj(Max), V1.21.21.21.21.21.2
VO Adj(Min), V1.21.21.21.21.21.2
WBN 10-10 kHz(Typ), uVrms606060606060

Eco Plan

REF1004C-1.2REF1004C-1.2/2K5REF1004I-1.2REF1004I-1.2/2K5REF1004I-1.2/2K5E4REF1004I-1.2E4
RoHSCompliantCompliantCompliantCompliantCompliantCompliant

Application Notes

  • Implementing a Direct Thermocouple Interface With MSP430x4xx and ADS1240 (Rev. A)
    PDF, 195 Kb, Revision: A, File published: Oct 4, 2001
    This application report describes and shows how to implement a direct thermocouple interface, without using the signal conditioning circuitry normally required for thermocouples. The thermocouple interfaces directly to the Burr Brown ADS1240, 24-bit ADC from Texas Instruments, Inc. An MSP430F41x ultralow-power microcontroller is used to communicate with the ADC, read the conversion values, convert
  • Remove the DC Portion of Signals with the ADS7817
    PDF, 55 Kb, File published: Sep 27, 2000
    Unwanted portions of a signal, such as a DC pedestal, can be difficult to reject in a single supply circuit. A DC pedestal voltage most typically appears at the output of an operational amplifier with a small signal riding on top of it. This pedestal voltage is required in the analog domain to insure that the small signal that contains the pertinent information never falls below the ground potenti

Model Line

Manufacturer's Classification

  • Semiconductors> Power Management> Voltage Reference> Shunt Voltage Reference
EMS supplier