Starter Kit Keil MCBSTM32F200UME

MCBSTM32F200UME - Starter kit which includes the ULINK-ME debug adapter and MCBSTM32F200 evaluation board.

Detailed Description

The Keil MCBSTM32F200 Evaluation Board enables you to create and test working programs based on the STMicroelectronics STM32 F2xx series of ARM Cortex-M3 processor-based devices.

Starter Kit Keil MCBSTM32F200UME

Features

  • 120MHz STM32F207IG ARM Cortex-M3 processor-based MCU in 176-pin BGA
  • On-Chip Memory: 1MB Flash & 128KB RAM
  • External Memory: 8MB NOR Flash, 512MB NAND Flash, 2MB SRAM, 8KB I2C EEPROM with NFC interface
  • 2.4 inch Color QVGA TFT LCD with resistive touchscreen
  • 10/100 Ethernet Port
  • USB 2.0 Full Speed - USB, USB-OTG, & USB Host
  • USB 2.0 High Speed - USB, USB-OTG, & USB Host
  • 1 CAN Interface
  • Serial/UART Port
  • MicroSD Card Interface
  • 5-position Joystick
  • 3-axis digital Accelerometer
  • 3-axis digital Gyroscope
  • Analog Voltage Control for ADC Input (potentiometer)
  • Audio CODEC with Line-In/Out and Speaker/Microphone
  • Digital Microphone
  • Digital VGA Camera
  • Push-Buttons for Reset, Wakeup, Tamper and User
  • 8 LEDs directly connected to port pins
  • Power Supply via:
    • High Speed and Full Speed USB (micro) connectors
    • Power jack (8V-12V) with Voltage Regulator capable to supply both USB host interfaces (500mA each)
  • Debug Interface Connectors
    • 20 pin JTAG (0.1 inch connector)
    • 10 pin Cortex debug (0.05 inch connector)
    • 20-pin Cortex debug + ETM Trace (0.05 inch connector)RoHS compliance

The connectors on the evaluation board provide easy access to many of the STM32F207's on-chip peripherals.

  • Serial Port: A standard DB9 connector is on the board for the STM32F207's built-in UART interfaces.

    This is a full duplex, serial port.

  • CAN Port: A standard DB9 connector for applications requiring CAN communications.
  • USB 2.0 Full Speed and High Speed Ports: 2 standard USB Type mini-B connectors: One for full-speed and one for high-speed USB Device, Host and OTG communications.
  • 100/10M Ethernet Port: A standard RJ45 connector on the MCBSTM32F200 board connects to an on-board Ethernet transceiver for applications requiring Ethernet communications.
  • VGA Camera and Microphone: A 640×480 Color CMOS camera and on-board digital microphone for VGA image and digital sound capture.
  • LCD Display with Touch Screen: A detachable, 240×320 TFT, color LCD display with 4-wire, resistive touch screen. You may use this graphic display device to show real-time debug and program status messages.
  • Stereo CODEC and Amplifier and On-board Microphone: A low-power stereo CODEC with headphone and microphone amplifier. You may use this on-board device for audio applications.
  • Motion Detectors: Both a low-power, 3-axis accelerometer and a 3-axis MEMS inertial rate sensor(gyroscope). You may use these on-board devices for applications requiring the detection of movement.
  • On-board Battery: A removable, lithium battery is included on the MCBSTM32F200 to maintain power to the real-time clock when the board disconnects from the main power supply.
  • Analog Voltage Control for ADC Input: An adjustable analog voltage source for testing the Analog to Digital converter built into the STM32F207 device.
  • MicroSD Card Connector: A MicroSD Card connector for developing applications requiring access to MicroSD Cards.
  • JTAG and Cortex/ETM Download and Debug: The MCBSTM32F200 board incorporates both a JTAG interface and a Cortex Debug + ETM interface.  When coupled with the ULINK2 USB-JTAG adapter, the Serial Wire JTAG interface allows flash programming and debugging.  With the ULINKPro adapter, the Cortex Debug/ETM interface allows flash programming and instruction trace debugging.

Evaluation Software

The MCBSTM32F200 Evaluation Board and Starter Kit include the MDK-Lite development tools. These tools help you get started writing programs and testing the microcontroller and its capabilities. Sample applications that run on the MCBSTM32F200 and a Quickstart guide are included.

The MCBSTM32F200UME Starter Kit includes:

  1. The MCBSTM32F200 Evaluation Board.
  2. ULINK-ME Debug adapter
  3. MDK-ARM Lite Edition

MCBSTM32F200 Schematic Diagram

keil.com

You may have to register before you can post comments and get full access to forum.
EMS supplier