Microcontroller Board Chip45 SAVVY128

Microcontroller Board with AVR ATmega128, USB Interface, RS232/RS485, Realtime Clock and SD-Card.

Detailed Description

Chip45 AVR-SAVVY128

Savvy128 V1.3 is a highly integrated microcontroller board with the Atmel AVR ATmega128, USB interface, RS232, realtime clock and sd-card.
Options
Frequency
The XTAL crystal is a wired HC49 type and comes with the module.

The frequency can be selected as option from 3.6864MHz up to 16MHz.
Scope of Delivery
Savvy128 is being shipped als fully SMT-assembled controller board with all other components included as kit. Depending on application requirements, certain functions can be assembled as necessary.

Features

  • the ATmega128 microcontroller
  • MMC/SD-card header (with level shifters!)
  • serial RS232 interface with driver
  • (optional RS485 driver)
  • USB 2.0 full speed interface with USB UART converter CP2102
  • infrared detector for standard remote controls
  • 2 push buttons
  • two-color LED for the application
  • reset (protection) circuitry
  • standard 6-pin AVR ISP header
  • HC49 XTAL crystal (frequency selectable)
  • onboard status LED
  • 3.3V voltage regulator
  • optional 5V regulator
  • pin headers with all ATmega128 signals for expansion cards

The kit consists the following components: 9pin Sub-D connector, USB connector, 2pin power connector with matching cable connector, 2x 26pin headers for expansion boards, AVR ISP header, connector for SavvyDISP, HC49 crystal (frequency selectable), 2x push buttons, two-color LED, IR-detector.

Schematic diagram SAVVY128 microcontroller module

Other Names:

AVRSAVVY128, SAVVY1281.3, AVR SAVVY128, SAVVY128 1.3, AVR-SAVVY128 SAVVY128-1.3, AVR-SAVVY128 SAVVY128-1.3

You may have to register before you can post comments and get full access to forum.
EMS supplier