Evaluation Kit Analog Devices ADZS-BF533-EZLITE

Detailed Description

The EZ-KIT Lite includes an ADSP-BF533 desktop evaluation board and fundamental debugging software to facilitate architecture evaluations via a USB-based PC-hosted tool set. With this EZ-KIT Lite, users can learn more about ADI's ADSP-BF533 hardware and software development and prototype applications. The ADSP-BF533 EZ-KIT Lite provides an evaluation suite of the VisualDSP++ integrated development and debug environment. The VisualDSP++ software included with the EZ-KIT Lite is limited in program memory size for use solely with the EZ-KIT Lite product.

The evaluation board is designed to be used in conjunction with the VisualDSP++ development environment to test the capabilities of
ADSP-BF533 Blackfin processors. The VisualDSP++ development environment gives you the ability to perform advanced application code development and debug, such as:

• Create, compile, assemble, and link application programs written in C++, C, and ADSP-BF533 assembly
• Load, run, step, halt, and set breakpoints in application programs
• Read and write data and program memory
• Read and write core and peripheral registers
• Plot memory

Access to the ADSP-BF533 processor from a personal computer (PC) is achieved through a USB port or an optional JTAG emulator. The USB interface gives unrestricted access to the ADSP-BF533 processor and the evaluation board peripherals. Analog Devices JTAG emulators offer faster communication between the host PC and target hardware. Analog Devices carries a wide range of in-circuit emulation products.

The board features:

• Analog Devices ADSP-BF533 Blackfin processor
  • Performance up to 600 MHz
  • 160-pin mini-BGA package
  • 27 MHz CLKIN oscillator
• Synchronous dynamic random access memory (SDRAM)
  • MT48LC32M16 - 64 MB (32M x 16 bits)
• Flash memories
  • 2 MB (512K × 16 × 2chips)
• Analog audio interface
  • AD1836 – Analog Devices 96 kHz audio codec
  • 4 input RCA phono jacks (2 channels)
  • 6 output RCA phono jacks (3 channels)
• Analog video interface
  • ADV7183 video decoder w/ 3 input RCA phono jacks
  • ADV7171 video encoder w/ 3 output RCA phono jacks
• Universal asynchronous receiver/transmitter (UART)
  • ADM3202 RS-232 line driver/receiver
  • DB9 male connector
• LEDs
  • 10 LEDs: 1 power (green), 1 board reset (red), 1 USB (red),6 general-purpose (amber), and 1 USB monitor (amber)
• Push buttons
  • 5 push buttons with debounce logic: 1 reset,4 programmable flags
• Expansion interface
  • PPI, SPI, EBIU, Timers2-0, UART, programmable flags,SPORT0, SPORT1
• Other features
  • JTAG ICE 14-pin header

The EZ-KIT Lite board has two flash memories with a total of 2 MB of memory. The flash memories can be used to store user-specific boot code, allowing the board to run as a stand-alone unit. The board also has 64 MB of SDRAM, which can be used by the user at runtime.

ADSP-BF533 EZ-KIT Lite evaluation system package contains the following items.

• ADSP-BF533 EZ-KIT Lite board
• VisualDSP++ Installation Quick Reference Card
• CD containing:
  • VisualDSP++ software
  • ADSP-BF533 EZ-KIT Lite debug softwareADSP-BF533 EZ-KIT Lite Evaluation System Manual 1-3
  • USB driver files
  • Example programs
  • ADSP-BF533 EZ-KIT Lite Evaluation System Manual (this document)
• Universal 7.5V DC power supply
• USB 2.0 type cable
• Registration card (please fill out and return)

Schematic diagram ADSP-BF533 EZ-KIT Lite board

analog.com

Other Names:

ADZSBF533EZLITE, ADZS BF533 EZLITE