Header board Olimex AVR-H128-CAN

AVR-H128CAN is inexpensive way to develop and prototype circuits with AT90CAN128 without need to deal with SMD soldering.

Detailed Description

All microcontroller pins are available on extension header with 0.1" and power supply, oscillators, ICSP, JTAG are wired, so all you need to do is to connect your additional components to the AVR ports, as the step is 0.1" these headers perfectly fit the prototype sea of pad boards with 0.1" step.

Olimex: AVR-H128-CAN Header Board

FEATURES

  • AT90CAN128-16AU microcontroller with 128KB Flash, 4KB RAM, 4KB EEPROM, CAN controller
  • ICSP 5×2 pin connector for in-circuit programming with AVR-PG1 or AVR-PG2 or STK500 compatible programmer
  • JTAG 5×2 pin connector for in-circuit debugging with AVR-JTAG-L or AVR-JTAG-USB
  • 16MHz scillator circuit
  • 32768 Hz oscillator circuit
  • Reset IC ZM33064
  • +5V voltage regulator LM78L05
  • power supply filtering capacitors
  • extension pin headers for each uC pin
  • FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
  • dimensions 47×47 mm (1.85×1.85")

AVR-H128-CAN Schematic Diagram

olimex.com

Other Names:

AVRH128CAN, AVR H128 CAN

You may have to register before you can post comments and get full access to forum.
EMS supplier