Circuits & Schematics Microcontrollers Usage: clock - 4

Subsection: "Microcontrollers Usage"
  Including:
  AVR   Clock   PIC   Programmer
Search results: 116 Output: 31-40
  1. .. is detected. The RECORD LED fires when images are being recorded on the SD-card. The first time, you need to set the clock. Take the remote control and press the CLOCK key until the camera asks for the password. Press keys 1-2-3-4 in ...
    12-03-2010
  1. .. 0=output TRISB = 0b00110011; // Option: PS: 000 // PSA: 0 assigned to Timer0 // T0SE: 0 faling edge // T0CS: 0 internal clock // INTEDG: 1 rising Edge (sunshine) // nRBPU: 1 pull-ups disable OPTION = 0b11000000; // Set the Port to off ...
    22-03-2010
  1. .. signal must be generated utterly on the dot. Program was created in assembler and compiled code is here . Microcontroller clock is on maximum frequency - 20 MHz. Frequency 22 MHz would be better, but for reproducibility I accepted 20 MHz. ...
    23-03-2010
  2. .. the battery backup system. The ATTiny45 runs with its internal calibrated oscillator at 8MHz, but the software sets the clock prescaler to divide it by four, so the core runs at 2MHz. Two voltage divider resistor networks scale the main ...
    21-04-2010
  3. .. for a USB Mouse. The example is even configured for the same architecture that I was planning to use (target device, CPU clock, and fuse values), so I didn't need to change anything in the makefile. Although, I did want to use my Atmel ...
    05-05-2010
  4. .. temperature recorder can be seen with the external thermistor plugged in. The connector on the end contains power, I 2 C clock and data and analogue input. The overall size of the complete unit is 40 mm long, 26 mm wide and 16 mm tall. In ...
    12-05-2010
  5. .. monitor in my spare time. The I2C bus was developed by Philips in the 1980’ s. It is a serial bus, consisting of a clock and data line. The protocol specifies START and STOP conditions, the data format (8 bits, MSB first), and and ...
    20-05-2010
  6. .. Mijanovic, Nedjeljko Lekic Part 1 - Schematic Let us look at the first shift register. The microcontroller drives CLOCK input directly. The same signal passes through the RC filter and drives DATA input D (Figure 5). The RC filter ...
    11-05-2013
  7. Circuits Microcontrollers Usage Atmel Attiny11 Attiny12 Attiny13 Attiny15 Attiny25 Attiny45 Attiny85
    .. to further repair on SPI normal programmer. Do not use this option with Attiny11 or Attiny15 . Fusebits: internal 4 MHz clock not divided by 8. Will be good to select the “fast rising power” too. Update 3 May 2010 : If you ...
    26-05-2010
  8. Circuits Microcontrollers Usage Atmel Atmega8 Atmega16 Atmega32 Atmega64 Attiny2313
    .. it, device for repairing dead Atmega family AVRs by writing wrong fusebits. Most common mistakes or problems are a wrong clock source (CKSEL fusebits), disabled SPI programming (SPIEN fuse) or disabled reset pin (RSTDISBL fuse). This ...
    02-06-2010

Sort by: relevance / date

Search "clock" on other search engines: Only-DataSheet.com Google
EMS supplier