Circuits & Schematics Microcontrollers Usage: clock - 8

Subsection: "Microcontrollers Usage"
  Including:
  AVR   Clock   PIC   Programmer
Search results: 116 Output: 71-80
  1. .. The real value differs from one device to other. It can even change due to external parameters (temperature, power voltage, clock frequency, etc). Using only the parasite capacitor makes almost impossible to tune correctly the LC circuit. ...
    27-11-2011
  1. .. the USB cable to pins 15 and 16 of the chip and place a capacitor on pin 14 to help smooth the inbuilt 3.3V supply. The clock for the microcontroller is derived from the 20MHz crystal with the two 15pF capacitors providing the correct ...
    06-06-2012
  1. .. pin of FT232R with 10k pull-up resistor, which can be used for power saving functions, or it can be used for providing clock to ATmega13A. You can change functions of CBUS pins of FT232R using FT_Prog software which you can download ...
    19-01-2012
  2. .. Manchester Encoding, which is a way of encoding data so that it can be transmitted over a single wire ensuring that the clock information is able to be recovered easily. With Manchester encoding, there is always a transition in the ...
    27-01-2012
  3. .. . CH1 to CH4 are 1V full scale. CH5 to CH8 are 10V full scale. CH5 to CH8 use the input voltage divider. The real-time clock is provided by U4, DS1302. BT1 is a super capacitor 0.33F for power backup to the RTC chip. The DS1302 is ...
    08-04-2012
  4. .. type. The new memory cards that used in digital camera usually are preformatted with FAT. Setup File To set the internal clock, interval and station name, the setup file must be prepared. The setup file is a simple text file. It can be ...
    13-04-2012
  5. .. DDS Communication. A DDS AD9833 from Analog Devices is a chip that is driven by a hi-frequency oscillator. I used a 50 Mhz clock. Inside this IC there is a big divider that goes down to less than 1Hz. The resulting clock is passed to ...
    23-04-2012
  6. .. pictures and a Makefile. In addition to “make flash” you of course need to update the fuse bits to use the PLL clock source see details from my previous tutorial for that. I also very strongly recommend testing the device using ...
    30-05-2012
  7. .. memory mappings, register addresses etc. The NXP LPC1769 is an ARM 32-bit Cortex-M3 Microcontroller with MPU. Features: CPU clock up to 120MHz, 512kB on-chip Flash ROM with enhanced Flash Memory Accelerator In-System Programming (ISP) and ...
    14-02-2013
  8. .. module can be interfaced as a SPI slave device. In that case the SPI signal lines SDO (serial data out), SCLK (serial clock), and SS (slave select) from the microcontroller can be directly connected to the MOSI, CLK, and CS pins ...
    30-06-2012

Sort by: relevance / date

Search "clock" on other search engines: Only-DataSheet.com Google
EMS supplier