Datasheet LPC2194HBD64/01,15 - NXP ARM Microcontrollers (MCU) ARM7 256KF/16KR/CAN
Part Number: LPC2194HBD64/01,15
Detailed Description
Manufacturer: NXP
Description: ARM Microcontrollers (MCU) ARM7 256KF/16KR/CAN
Docket:
LPC2194
Single-chip 16/32-bit microcontroller; 256 kB ISP/IAP flash with 10-bit ADC and CAN
Rev.
6 -- 14 June 2011 Product data sheet
1. General description
The LPC2194 is based on a 16/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, together with 256 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. With its compact 64-pin package, low power consumption, various 32-bit timers, 4-channel 10-bit ADC, four advanced CAN channels, PWM channels and 46 fast GPIO lines with up to nine external interrupt pins this microcontroller is particularly suitable for automotive applications such as a CAN gateway that connects several CAN busses or a CAN bridge between sub networks at different speeds. Sensors with CAN interface or
Specifications:
- A/D Channels Available: 4
- Clock Frequency Max: 60 MHz
- Core: ARM7TDMI-S
- Data Bus Width: 16 bit/32 bit
- Height: 1.4 mm (Max)
- Interface: CAN, I2C, SSP, SPI, UART
- Length: 10.1 mm (Max)
- Mounting Style: SMD/SMT
- Number of I/O Lines: 46
- Number of Timers: 2
- Number of bits in ADC: 10 bit
- On-Chip ADC: Yes
- On-Chip DAC: No
- Operating Supply Voltage: 3.3 V
- Operating Temperature Range: - 40 C to + 125 C
- Package / Case: LQFP-64
- Packaging Type: Tray
- Processor Series: LPC21
- Program Memory Size: 256 Kb
- Program Memory Type: Flash
- RAM Size: 16 Kb
- Supply Voltage - Max: 3.6 V
- Supply Voltage - Min: 1.65 V
- Width: 10.1 mm (Max)
- RoHS: Yes
- Part Aliases: LPC2194HBD64/01-S
Other Names:
LPC2194HBD64/0115, LPC2194HBD64/01 15