Electronics ru
Advanced Search +

Datasheet Texas Instruments MSP430F6736IPZ

Datasheet Texas Instruments MSP430F6736IPZ

ManufacturerTexas Instruments
Part NumberMSP430F6736IPZ

MSP430F6736 Mixed Signal Microcontroller 100-LQFP -40 to 85




Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityNo


Package TypePZ
Industry STD TermLQFP
Package QTY90
CarrierJEDEC TRAY (10+1)
Device MarkingF6736
Width (mm)14
Length (mm)14
Thickness (mm)1.4
Pitch (mm).5
Max Height (mm)1.6
Mechanical DataDownload »


ADCADC10 - 6ch
SigmaDelta24 - 3ch
Active Power (uA/MHz)346
Additional FeaturesLCD
Real-Time Clock
Temp Sensor
Brown Out Reset
Approx. Price (US$)3.25 | 1ku
GPIO Pins(#)72
Max VCC3.6
Min VCC1.8
Non-volatile Memory (KB)128
Operating Temperature Range(C)-40 to 85
Package GroupLQFP
Package Size: mm2:W x L (PKG)80LQFP: 196 mm2: 14 x 14(LQFP)
Special I/ON/A
Standby Power (LPM3-uA)2.9
Timers - 16-bit4
Wakeup Time (us)3

Eco Plan

Pb FreeYes

Design Kits & Evaluation Modules

  • Evaluation Modules & Boards: MSP-TS430PZ100B
    MSP-TS430PZ100B - 100-pin Target Development Board for MSP430F6x MCUs
    Lifecycle Status: Active (Recommended for new designs)
  • Evaluation Modules & Boards: EVM430-F6736
    EVM430-F6736 - MSP430F6736 EVM for Metering
    Lifecycle Status: Active (Recommended for new designs)
  • JTAG Emulators/ Analyzers: ENERGYTRACE
    MSP EnergyTrace Technology
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • Download » Application Notes, PDF, 414 Kb, 04-08-2013
    ULP Temperature-Compensated RTC on MSP430F6736
  • Download » Application Notes, PDF, 3.7 Mb, Revision: E, 08-05-2015
    Implementation of a Single-Phase Electronic Watt-Hour Meter Using MSP430F6736(A) (Rev. E)
    This application report describes the implementation of a single-phase electronic electricity meter using the Texas Instruments MSP430F673x(A) metering processor. It also includes the necessary information with regard to metrology software and hardware procedures for this single-chip implementation.
  • Download » Application Notes, PDF, 74 Kb, 11-12-2013
    Using TI’s DLMS COSEM Library
    This application report describes in detail the usage of DLMS COSEM library developed by Texas Instruments for customers who use TI's microcontrollers in metering applications. The library is provided as object coded with a configuration file for ease of use. The library can be obtained by contacting the regional sales and marketing offices. The customer will have to sign an SLA before getting acc
  • Download » Application Notes, PDF, 2.1 Mb, Revision: A, 07-20-2015
    Designing With MSP430 and Segment LCDs (Rev. A)
    Segment liquid crystal displays (LCDs) are needed to provide information to users in a wide variety of applications from smart meters to electronic shelf labels (ESL) to medical equipment. Several MSP430в„ў microcontroller families include built-in low-power LCD driver circuitry that allows the MSP430 MCU to directly control the segmented LCD glass. This application note helps explain how segmented
  • Download » Application Notes, PDF, 151 Kb, Revision: D, 11-03-2016
    Migrating from the MSP430F5xx,F6xx Family to the MSP430FR58xx/FR59xx/68xx Family (Rev. D)
    This application report helps enable easy migration from MSP430F5xx and MSP430F6xx flash-based MCUs to the MSP430FR58xx/FR59xx/68xx/69xx FRAM-based MCUs. For the migration guide to MSP430FR57xx, see Migrating From the MSP430F2xx Family to the MSP430FR57xx Family. It covers programming, system, and peripheral considerations when migrating firmware. The intent is to highlight differences between the
  • Download » Application Notes, PDF, 551 Kb, Revision: A, 04-01-2016
    General Oversampling of MSP ADCs for Higher Resolution (Rev. A)
    Multiple MSP ultra-low-power microcontrollers offer analog-to-digital converters (ADCs) to convert physical quantities into digital numbers, a function that is widely used across numerous applications. There are times, however, when a customer design demands a higher resolution than the ADC of the selected MSP can offer. This application report, which is based on the previously-published Oversampl
  • Download » Application Notes, PDF, 475 Kb, 10-05-2012
    Design Considerations When Using the MSP430 Graphics Library
    LCDs are a growing commodity in todays market with products as diverse as children's toys to medical devices. Modern LCDs, along with the graphics displayed on them, are growing in complexity. A graphics library can simplify and accelerate development while creating the desired user experience. TI provides the MSP430 Graphics Library for use in developing products with the MSP430в„ў MCU. This
  • Download » Application Notes, PDF, 752 Kb, 12-07-2015
    MSP Code Protection Features
    MSP microcontrollers (MCUs) offer a number of features to help control code accessibility in the device, to add different layers of code access management and protection strategies. These include features that can lock or password protect the JTAG/SBW access, IP Encapsulation (IPE) to isolate sensitive code with different permissions than the rest of the program, and bootloader (BSL) access featur
  • Download » Application Notes, PDF, 520 Kb, 12-07-2015
    ESD Diode Current Specification
    This document explains the maximum ESD diode current specified for GPIO on MSP microcontrollers. Sometimes signals on specific pins exceed the supply of the MSP MCU. In such a case, the device can handle this overvoltage condition through the ESD diodes, but the ESD diode specification must be considered during application design. The items to be considered are described in this document.

Moldel Line

Series: MSP430F6736 (4)

Manufacturer's Classification

  • Semiconductors > Microcontrollers (MCU) > MSP430 ultra-low-power MCUs > MSP430F5x/6x
Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus