Datasheet Texas Instruments SN412008DRE4
| Manufacturer | Texas Instruments |
| Series | OPA2134 |
| Part Number | SN412008DRE4 |
SoundPlus™ Audio Operational Amplifier with Low Distortion, Low Noise and Precision 8-SOIC -40 to 85
Datasheets
OPAx134 SoundPlusв„ў High Performance Audio Operational Amplifiers datasheet
PDF, 1.2 Mb, Revision: A, File published: Oct 28, 2015
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | No |
Packaging
| Pin | 8 | 8 |
| Package Type | D | D |
| Industry STD Term | SOIC | SOIC |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 2500 | 2500 |
| Carrier | LARGE T&R | LARGE T&R |
| Device Marking | 2134UA | OPA |
| Width (mm) | 3.91 | 3.91 |
| Length (mm) | 4.9 | 4.9 |
| Thickness (mm) | 1.58 | 1.58 |
| Pitch (mm) | 1.27 | 1.27 |
| Max Height (mm) | 1.75 | 1.75 |
| Mechanical Data | Download | Download |
Parametrics
| Additional Features | Burr-Brownв„ў Audio |
| Architecture | FET |
| CMRR(Min) | 86 dB |
| CMRR(Typ) | 100 dB |
| GBW(Typ) | 8 MHz |
| Input Bias Current(Max) | 100 pA |
| Iq per channel(Max) | 5 mA |
| Iq per channel(Typ) | 4 mA |
| Number of Channels | 2 |
| Offset Drift(Typ) | 2 uV/C |
| Operating Temperature Range | -40 to 85 C |
| Output Current(Typ) | 40 mA |
| Package Group | SOIC |
| Package Size: mm2:W x L | 8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG |
| Rail-to-Rail | No |
| Rating | Catalog |
| Slew Rate(Typ) | 20 V/us |
| Total Supply Voltage(Max) | 36 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 5 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 8 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 2 mV |
Eco Plan
| RoHS | Compliant |
Design Kits & Evaluation Modules
- Daughter Cards: AUDK2G
66AK2Gx (K2G) Audio Daughter Card
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- Stabilizing difference amplifiers for headphone applicationsPDF, 670 Kb, File published: Apr 28, 2015
- Reducing distortion from CMOS analog switchesPDF, 375 Kb, File published: Jan 29, 2015
- Distortion and source impedance in JFET-input op ampsPDF, 182 Kb, File published: Oct 24, 2014
- Remove the DC Portion of Signals with the ADS7817PDF, 55 Kb, File published: Sep 27, 2000
Unwanted portions of a signal, such as a DC pedestal, can be difficult to reject in a single supply circuit. A DC pedestal voltage most typically appears at the output of an operational amplifier with a small signal riding on top of it. This pedestal voltage is required in the analog domain to insure that the small signal that contains the pertinent information never falls below the ground potenti
Model Line
Series: OPA2134 (8)
Manufacturer's Classification
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps
