Datasheet Vishay PTN1206E7230BST1

PTN
www.vishay.com Vishay Dale Thin Film Commercial Thin Film Chip Resistor, Surface Mount Chip
FEATURES Actual Size 1505 These chip resistors are available in both "top side" and "wraparound" termination styles in a variety of sizes. They incorporate self passivated, enhanced Tantalum Nitride films, to give superior performance on moisture resistance, voltage coefficient, power handling and resistance stability. The terminations consist of an adhesion layer, a leach resistant nickel barrier, and solder coating. This product will out-perform all requirements of characteristic E of MIL-PRF-55342. Moisture resistant High purity alumina substrate Non-standard values available Available Will pass +85 °C, 85 % relative humidity and Available 10 % rated power 100 % visual inspected per MIL-PRF-55342 Non-inductive Available Very low noise and voltage coefficient (< -30 dB) Laser-trimmed tolerances to ± 0.05 % Available Wraparound resistance less than 10 m Epoxy bondable termination available Sulfur resistant (per ASTM B809-95 humid vapor test) Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 CONSTRUCTION
Passivation Tantalum Nitride Resistive Film Solder Coating Nickel Barrier High Purity Alumina Substrate Adhesion Layer Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non-RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details. TYPICAL PERFORMANCE
ABSOLUTE TCR TOL. 10 0.05 STANDARD ELECTRICAL SPECIFICATIONS
TEST Material Resistance Range TCR: Absolute Tolerance: Absolute Stability: Absolute Stability: Ratio Voltage Coefficient Working Voltage Operating Temperature Range Storage Temperature Range Noise Shelf Life Stability: Absolute SPECIFICATIONS Tantalum nitride 10 to 3 M ± 10 ppm/°C to ± 100 ppm/°C ± 0.05 % to ± 5 % R ± 0.03 % 0.1 ppm/V 75 V to 200 V -55 °C to +155 °C -55 °C to +155 °C < -30 dB CONDITIONS -55 °C to +125 °C +25 °C 2000 h at 70 °C - COMPONENT RATINGS
CASE SIZE (1) POWER RATING (mW) 0402 50 0502 100 0505 150 0603 150 0705 200 0805 200 1005 250 1010 500 1206 400 1505 400 2208 750 2010 800 2512 2000 Note (1) 0705 and 0805 are the same (only use 0805 when ordering) Revision: 20-Nov-14 WORKING VOLTAGE (V) 75 75 75 75 100 100 100 150 200 150 150 200 200 RESISTANCE RANGE () 20 to 51.1K 20 to 65K 20 to 130K 10 to 130K 10 to 301K 10 to 301K 10 to 360K 50 to 600K 10 to 1M 10 to 1M 10 to 1.75M 10 to 2M 10 to 3M Document Number: 60026 1 For technical questions, cont …