Electronics ru
Advanced Search +

Datasheet Texas Instruments TPS40210DGQR

Datasheet Texas Instruments TPS40210DGQR

ManufacturerTexas Instruments
Part NumberTPS40210DGQR

Wide Input Range Current Mode Boost Controller 10-MSOP-PowerPAD -40 to 125


  • Download » Datasheet, PDF, 1.7 Mb, Revision: F, 12-17-2014, File uploaded 03-23-2018
    TPS4021x 4.5-V to 52-V Input Current Mode Boost Controller datasheet
    Docket ↓
    Folder Sample &
    Buy Support &
    Community Tools &
    Software Technical
    Documents TPS40210, TPS40211
    SLUS772F – MARCH 2008 – REVISED MARCH 2015 TPS4021x 4.5-V to 52-V Input Current Mode Boost Controller
    1 Features 3 Description The TPS40210 and TPS40211 are wide-input voltage
    (4.5 V to 52 V), nonsynchronous boost controllers.
    They are suitable for topologies which require a
    grounded source N-channel FET including boost,
    flyback, SEPIC and various LED Driver applications.
    The device features include programmable soft-start,
    overcurrent protection with automatic retry and
    programmable oscillator frequency. Current mode
    control provides improved transient response and
    simplified loop compensation. The main difference
    between the two parts is the reference voltage to
    which the error amplifier regulates the FB pin. 1 For Boost, Flyback, SEPIC, LED Drive Apps
    Wide Input Operating Voltage: 4.5 V to 52 V
    Adjustable Oscillator Frequency
    Fixed Frequency Current Mode Control
    Internal Slope Compensation ...


Family: TPS40210, TPS40211


Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes


Package TypeDGQ
Industry STD TermHVSSOP
Package QTY2500
CarrierLARGE T&R
Device Marking40210
Width (mm)3
Length (mm)3
Thickness (mm)1.02
Pitch (mm).5
Max Height (mm)1.1
Mechanical DataDownload »


Duty Cycle(Max)95 %
Iout(Max)6 A
Operating Temperature Range-40 to 125 C
Package GroupMSOP-PowerPAD
Regulated Outputs1
Special FeaturesEnable,Frequency Synchronization
Switch Current Limit(Typ)6 A
Switching Frequency(Max)1000 kHz
Switching Frequency(Min)35 kHz
Vin(Max)52 V
Vin(Min)4.5 V
Vout(Max)60 V
Vout(Min)5 V

Eco Plan


Design Kits & Evaluation Modules

  • Evaluation Modules & Boards: TPS40210EVM
    Development Boards/EVMs
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • Download » Application Notes, PDF, 389 Kb, 11-18-2008
    USB Charger Based on TPS40210 SEPIC Converter
  • Download » Application Notes, PDF, 145 Kb, 04-16-2013
    Synchronous rectification boosts efficiency by reducing power loss
  • Download » Application Notes, PDF, 314 Kb, 08-06-2008
    New current-mode PWM controllers support boost, flyback, SEPIC and LED-driver
  • Download » Application Notes, PDF, 1.2 Mb, 08-06-2008
    Q3 2008 Issue Analog Applications Journal
  • Download » Application Notes, PDF, 557 Kb, 03-07-2014
    Practical Feedback Loop Analysis for Current-Mode Boost Converter
  • Download » Application Notes, PDF, 2.5 Mb, 04-16-2013
    2Q 2013 Issue Analog Applications Journal
  • Download » Application Notes, PDF, 358 Kb, Revision: B, 07-17-2015
    Voltage Fed Full Bridge DC-DC & DC-AC Converter High-Freq Inverter Using C2000 (Rev. B)
    The High-Frequency Inverter is mainly used today in uninterruptible power supply systems, AC motor drives, induction heating and renewable energy source systems. The simplest form of an inverter is the bridge-type, where a power bridge is controlled according to the sinusoidal pulse-width modulation (SPWM) principle and the resulting SPWM wave is filtered to produce the alternating output voltage.
  • Download » Application Notes, PDF, 939 Kb, 10-09-2013
    Automated Frequency Response Analyzer
    This application report discusses a new method of doing stability Analysis testing by using basic labequipment, while not requiring any specific instruments.
  • Download » Application Notes, PDF, 186 Kb, Revision: C, 01-08-2014
    Basic Calculation of a Boost Converter's Power Stage (Rev. C)
    This application note gives the equations to calculate the power stage of a boost converter built with an IC with integrated switch and operating in continuous conduction mode. It is not intended to give details on the functionality of a boost converter (see Reference 1) or how to compensate a converter. See the references at the end of this document if more detail is needed.

Moldel Line

Series: TPS40210 (8)

Manufacturer's Classification

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Up (Boost) > Boost Controller (External Switch)
Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus