Datasheet Texas Instruments OPA2364IDGKTG4
Manufacturer | Texas Instruments |
Series | OPA2364 |
Part Number | OPA2364IDGKTG4 |
![Datasheet Texas Instruments OPA2364IDGKTG4](http://www.ti.com/graphics/folders/partimages/OPA2364.jpg)
1.8V, High CMR, RRIO Op Amp 8-VSSOP -40 to 125
Datasheets
OPAx363, OPAx364 1.8-V, 7-MHz, 90-dB CMRR, Single-Supply, Rail-to-Rail I/O Operational Amplifier datasheet
PDF, 1.8 Mb, Revision: D, File published: Mar 6, 2016
Extract from the document
Prices
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes |
Packaging
Pin | 8 |
Package Type | DGK |
Industry STD Term | VSSOP |
JEDEC Code | R-PDSO-G |
Package QTY | 250 |
Carrier | SMALL T&R |
Device Marking | BHL |
Width (mm) | 3 |
Length (mm) | 3 |
Thickness (mm) | .97 |
Pitch (mm) | .65 |
Max Height (mm) | 1.07 |
Mechanical Data | Download |
Parametrics
Additional Features | Shutdown |
Architecture | CMOS |
CMRR(Min) | 74 dB |
CMRR(Typ) | 90 dB |
GBW(Typ) | 7 MHz |
Input Bias Current(Max) | 10 pA |
Iq per channel(Max) | 0.75 mA |
Iq per channel(Typ) | 0.65 mA |
Number of Channels | 2 |
Offset Drift(Typ) | 3 uV/C |
Operating Temperature Range | -40 to 125 C |
Output Current(Typ) | 45 mA |
Package Group | VSSOP |
Package Size: mm2:W x L | 8VSSOP: 15 mm2: 4.9 x 3(VSSOP) PKG |
Rail-to-Rail | In,Out |
Rating | Catalog |
Slew Rate(Typ) | 5 V/us |
Total Supply Voltage(Max) | 5.5 +5V=5, +/-5V=10 |
Total Supply Voltage(Min) | 1.8 +5V=5, +/-5V=10 |
Vn at 1kHz(Typ) | 17 nV/rtHz |
Vos (Offset Voltage @ 25C)(Max) | 2.5 mV |
Eco Plan
RoHS | Compliant |
Application Notes
- High-Voltage Signal Conditioning for Differential ADCsPDF, 125 Kb, File published: Jun 14, 2004
Analog designers are frequently required to convert high-voltage signals to levels acceptable to low-voltage data converters with differential inputs. This paper describes solutions for this common task using modern amplifiers and typical power supplies. Three examples of conditioning В±10V bipolar signals for low-voltage analog-to-digital converters (ADCs) are shown: a single-supply design, - Tuning in AmplifiersPDF, 44 Kb, File published: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, File published: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, File published: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
Model Line
Series: OPA2364 (16)
Manufacturer's Classification
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps