RadioLocman.com Electronics ru
Advanced Search +
  

Datasheet Linear Technology LTC3536IDD#TRPBF

ManufacturerLinear Technology
SeriesLTC3536
Part NumberLTC3536IDD#TRPBF

1A Low Noise, Buck-Boost DC/DC Converter

Datasheets

  • Download » Datasheet PDF, 2.4 Mb, Revision: A, File uploaded: Jul 31, 2016
    LTC3536 - 1A Low Noise, Buck-Boost DC/DC Converter
    Docket ↓
    LTC3536
    1A Low Noise, Buck-Boost
    DC/DC Converter
    Features Description Regulated Output with Input Voltage Above, Below
    or Equal to the Output Voltage
    n 1.8V to 5.5V Input and Output Voltage Range
    n 1A Continuous Output Current for
    VIN ≥ 3V, VOUT = 3.3V
    n В±1% Output Voltage Accuracy
    n Low Noise Buck-Boost Architecture
    n Up to 95% Efficiency
    n Programmable Frequency from 300kHz to 2MHz
    n Synchronizable Oscillator
    n Burst ModeВ® Operation: 32ВµA I
    Q
    n Internal 1ms Soft-Start
    n Output Disconnect in Shutdow Shutdown Current: 1ВµA
    n Short-Circuit Protectio Small Thermally Enhanced 12-Pin MSOP
    and 10-Pin (3mm Г— 3mm) DFN Packages The LTCВ®3536 is an extended VIN range, fixed frequency,
    synchronous buck-boost DC/DC converter that operates
    from input voltages above, below or equal to the regulated
    output voltage. The topology incorporated in the LTC3536
    provides low noise operation, making it ideal for RF and ...

Prices

Packaging

Package3x3 DFN-10
Package CodeDD
Package Index05-08-1699

Parametrics

ArchitectureConstant Frequency Current Mode
Demo BoardsDC1797A,DC1852A
Design ToolsLTspice File
Export Controlno
FeaturesOutput Disconnect, External Synchronization, Resistor Set Frequency, Burst Mode
Frequency2000 kHz
Frequency Adjust Range300kHz - 2MHz
Frequency Sync Range300kHz - 2MHz
Integrated Inductorno
Ishutdown0.1 µA
Isupply0.032 mA
Max Phases1
Monolithicyes
Number of Outputs1
Operating Temperature Range-40 to 85 °C
Output Current1 A
Polyphaseno
Synchronousyes
TopologyBuck-Boost
Vin Max5.5 V
Vin Min1.8 V
Vout Max5.5 V
Vout MaximumVin
Vout Min1.8 V

Eco Plan

RoHSCompliant

Articles

  • Download » Articles - LT Journal PDF, 2.4 Mb, File published: Oct 18, 2012
    Multiple Power Sources No Problem for 1A, Low Noise Buck-Boost Converter with 1.8V-5.5V Input Voltage Range
    Docket ↓
    design features Multiple Power Sources No Problem for 1A, Low Noise
    Buck-Boost Converter with 1.8V–5.5V Input Voltage Range
    Genesia Bertelle Users expect their portable devices to operate from a range of power sources including
    USB, wall adapters and various types of batteries—alkaline, lithium-ion and LiFePO4.
    The LTCВ®3536 monolithic synchronous buck-boost converter easily accommodates
    a variety of power sources by efficiently operating in both buck and boost modes
    from an input voltage range of 1.8V to 5.5V. No complicated topology is required
    to accommodate power source inputs above, below or equal to the output. DESIGN VERSATILITY At 3.3V output, a load current of up
    to 1A can be supported over the entire
    lithium-ion input voltage range; 300m A of
    load current is supported when the input
    is 1.8V. The 1% accurate output voltage is programmable from 1.8V to
    5.5V via an external resistor divider.
    The switching frequency of the LTC3536 is
    user programmable from 300kHz to 2MHz
    via a single external resistor, allowing
    the converter to be optimized to meet the
    space and efficiency requirements of each 25 transient response regardless of inductor value and output capacitor size. COMPETITIVE BUCK-BOOST
    fSW = 1.3MHz 15
    5 Depending on the application requirements, a designer can prioritize light load
    efficiency or minimize supply noise by
    choosing from two operating modes: Burst
    ModeВ® operation and PWM operation, ...

Moldel Line

Series: LTC3536 (8)

Manufacturer's Classification

  • Power Management > Switching Regulator > Buck-Boost Regulators > Internal Power Switch Buck-Boost

Other Names:

LTC3536IDDTRPBF, LTC3536IDD TRPBF

Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus