Datasheet Texas Instruments TPS63011YFFR

ManufacturerTexas Instruments
SeriesTPS63011
Part NumberTPS63011YFFR
Datasheet Texas Instruments TPS63011YFFR

High Efficient Single Inductor Buck-Boost Converter with 2-A Switches 20-DSBGA -40 to 85

Datasheets

TPS6301x Highly Efficient, Single Inductor Buck-Boost Converter With 2-A Switches datasheet
PDF, 1.0 Mb, Revision: C, File published: Jan 15, 2016
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Packaging

Pin20
Package TypeYFF
Industry STD TermDSBGA
JEDEC CodeR-XBGA-N
Package QTY3000
CarrierLARGE T&R
Device MarkingTPS63011
Thickness (mm).4
Pitch (mm).4
Max Height (mm).625
Mechanical DataDownload

Parametrics

Duty Cycle(Max)100 %
Iout(Max)0.8 A
Iq(Typ)0.04 mA
Operating Temperature Range-40 to 85 C
Package GroupDSBGA
RatingCatalog
Special FeaturesDynamic Voltage Scaling,Enable,Frequency Synchronization,Light Load Efficiency,Load Disconnect,Synchronous Rectification,UVLO Fixed
Switch Current Limit(Min)1.2 A
Switch Current Limit(Typ)2.2 A
Switching Frequency(Max)2400 kHz
Switching Frequency(Min)2200 kHz
TopologyBuck/Boost
TypeConverter
Vin(Max)5.5 V
Vin(Min)2 V
Vout(Max)3.3 V
Vout(Min)2.8 V

Eco Plan

RoHSCompliant

Design Kits & Evaluation Modules

  • Evaluation Modules & Boards: TPS63010EVM-235
    TPS63010EVM-235 Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • Basic Calculations of a 4 Switch Buck-Boost Power Stage (Rev. B)
    PDF, 400 Kb, Revision: B, File published: Jul 9, 2018
    This application note gives the equations to calculate the power stage of a non-inverting buck-boost converter built with an IC with integrated switches and operating in continuous conduction mode. See the references at the end of this document if more detail is needed.
  • IQ: What it is what it isn’t and how to use it
    PDF, 198 Kb, File published: Jun 17, 2011
  • Performing Accurate PFM Mode Efficiency Measurements (Rev. A)
    PDF, 418 Kb, Revision: A, File published: Dec 11, 2018
    When performing measurements on DC-DC converters using pulse frequency modulation(PFM)or any power save mode proper care must be taken to ensure that the measurements are accurate. An accurate PFM mode efficiency measurement is critical for systems which require high efficiency at low loads such as in smart home systems tablets wearables and metering.

Model Line

Series: TPS63011 (2)

Manufacturer's Classification

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Buck/Boost, Inverting or Split-Rail > Buck/Boost, Inverting or Split-Rail Converter (Integrated Switch)