Datasheet Texas Instruments TLV2470CP

ManufacturerTexas Instruments
SeriesTLV2470
Part NumberTLV2470CP
Datasheet Texas Instruments TLV2470CP

Single Low-Power Rail-to-Rail Input/Output Op Amp w/Shutdown 8-PDIP 0 to 70

Datasheets

Family of 600uA/Ch 2.8MHz Rail-to-Rail I/O High-Drive Op Amps with Shutdown datasheet
PDF, 2.9 Mb, Revision: E, File published: Jul 3, 2007
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Packaging

Pin8
Package TypeP
Industry STD TermPDIP
JEDEC CodeR-PDIP-T
Package QTY50
CarrierTUBE
Device MarkingTLV2470C
Width (mm)6.35
Length (mm)9.81
Thickness (mm)3.9
Pitch (mm)2.54
Max Height (mm)5.08
Mechanical DataDownload

Parametrics

Additional FeaturesShutdown
ArchitectureCMOS
CMRR(Min)64 dB
CMRR(Typ)84 dB
GBW(Typ)2.8 MHz
Input Bias Current(Max)50 pA
Iq per channel(Max)0.9 mA
Iq per channel(Typ)0.6 mA
Number of Channels1
Offset Drift(Typ)0.4 uV/C
Operating Temperature Range-40 to 125,0 to 70 C
Output Current(Typ)90 mA
Package GroupPDIP
Package Size: mm2:W x LSee datasheet (PDIP) PKG
Rail-to-RailIn,Out
RatingCatalog
Slew Rate(Typ)1.5 V/us
Total Supply Voltage(Max)6 +5V=5, +/-5V=10
Total Supply Voltage(Min)2.7 +5V=5, +/-5V=10
Vn at 1kHz(Typ)15 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)2.2 mV

Eco Plan

RoHSCompliant
Pb FreeYes

Application Notes

  • Conditioning a Switch-mode Power Supply Current Signal Using TI Op Amps
    PDF, 61 Kb, File published: Mar 23, 2000
    The switch-mode power supply primary current is often sensed using a power resistor. Using an op amp to amplify the current-sense signal can reduce cost and improve noise performance and efficiency. This report reviews the advantages of using an op amp circuit and analyzes the design criteria needed to choose the proper op amp.
  • Use of Rail-to-Rail Operational Amplifiers (Rev. A)
    PDF, 159 Kb, Revision: A, File published: Dec 22, 1999
    This application report assists design engineers to understand the functionality and benefits of rail-to-rail operational amplifiers. It shows simplified schematics, functions, and characteristics of the input and output stages. Typical application schematics for rail-to-rail operational amplifiers are also discussed.

Model Line

Manufacturer's Classification

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps
EMS supplier