Datasheet Texas Instruments OPA237NA/250E4
| Manufacturer | Texas Instruments |
| Series | OPA237 |
| Part Number | OPA237NA/250E4 |
Single-Supply Operational Amplifiers MicroAmplifier™ Series 5-SOT-23 -40 to 70
Datasheets
Single-Supply Operational Amplifiers MicroAmplifier™ Series datasheet
PDF, 1.7 Mb, Revision: A, File published: Feb 15, 2007
Extract from the document
Prices
Status
| Lifecycle Status | Active (Recommended for new designs) |
| Manufacture's Sample Availability | Yes |
Packaging
| Pin | 5 |
| Package Type | DBV |
| Industry STD Term | SOT-23 |
| JEDEC Code | R-PDSO-G |
| Package QTY | 250 |
| Carrier | SMALL T&R |
| Device Marking | A37A |
| Width (mm) | 1.6 |
| Length (mm) | 2.9 |
| Thickness (mm) | 1.2 |
| Pitch (mm) | .95 |
| Max Height (mm) | 1.45 |
| Mechanical Data | Download |
Parametrics
| Additional Features | N/A |
| Architecture | Bipolar |
| CMRR(Min) | 80 dB |
| CMRR(Typ) | 90 dB |
| GBW(Typ) | 1.4 MHz |
| Input Bias Current(Max) | 40000 pA |
| Iq per channel(Max) | 0.475 mA |
| Iq per channel(Typ) | 0.2 mA |
| Number of Channels | 1 |
| Offset Drift(Typ) | 1.3 uV/C |
| Operating Temperature Range | -40 to 70 C |
| Output Current(Typ) | 4.5 mA |
| Package Group | SOT-23 |
| Package Size: mm2:W x L | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) PKG |
| Rail-to-Rail | In to V- |
| Rating | Catalog |
| Slew Rate(Typ) | 0.5 V/us |
| Total Supply Voltage(Max) | 36 +5V=5, +/-5V=10 |
| Total Supply Voltage(Min) | 2.7 +5V=5, +/-5V=10 |
| Vn at 1kHz(Typ) | 28 nV/rtHz |
| Vos (Offset Voltage @ 25C)(Max) | 0.95 mV |
Eco Plan
| RoHS | Compliant |
Application Notes
- Precision Absolute Value CircuitsPDF, 100 Kb, File published: Oct 2, 2000
You can build a precision absolute value circuit using two op amps and two precision resistors. If you use an op amp and an IC difference amplifier no user supplied precision resistors or resistor adjustments are required. Circuits shown are suitable for precision split supply operation and for single-supply operation. When used with a rail-to-rail op amp the single supply circuit can approach a - 2Q 2012 Issue Analog Applications JournalPDF, 2.4 Mb, File published: Apr 26, 2012
- Tuning in AmplifiersPDF, 44 Kb, File published: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - A solar-powered buck/boost battery chargerPDF, 334 Kb, File published: Apr 26, 2012
- Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, File published: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, File published: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
Model Line
Series: OPA237 (7)
- OPA237NA/250 OPA237NA/250E4 OPA237NA/3K OPA237NA/3KE4 OPA237UA OPA237UA/2K5 OPA237UA/2K5G4
Manufacturer's Classification
- Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps
