Datasheet Texas Instruments TPS40192DRCR
Manufacturer | Texas Instruments |
Series | TPS40192 |
Part Number | TPS40192DRCR |
4.5V to 18V Input, Low Pin Count, Synchronous Buck Controller with Power Good 10-VSON -40 to 85
Datasheets
TPS4019x 4.5-V to 18-V Input, 10-Pin, Synchronous Buck Controller With Power Good datasheet
PDF, 2.6 Mb, Revision: F, File published: Nov 11, 2016
Extract from the document
Prices
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | Yes |
Packaging
Pin | 10 |
Package Type | DRC |
Industry STD Term | VSON |
JEDEC Code | S-PDSO-N |
Package QTY | 3000 |
Carrier | LARGE T&R |
Device Marking | 0192 |
Width (mm) | 3 |
Length (mm) | 3 |
Thickness (mm) | .9 |
Pitch (mm) | .5 |
Max Height (mm) | 1 |
Mechanical Data | Download |
Parametrics
Duty Cycle(Max) | 85 % |
Iout(Max) | 15 A |
Iq(Typ) | 2.5 mA |
Number of Phases | 1 |
Operating Temperature Range | -40 to 85 C |
Package Group | VSON |
Rating | Catalog |
Regulated Outputs | 1 |
Special Features | Enable,Pre-Bias Start-Up,Synchronous Rectification |
Switching Frequency(Max) | 600 kHz |
Switching Frequency(Min) | 600 kHz |
Type | Controller |
Vin(Max) | 18 V |
Vin(Min) | 4.5 V |
Vout(Max) | 14.4 V |
Vout(Min) | 0.591 V |
Eco Plan
RoHS | Compliant |
Design Kits & Evaluation Modules
- Evaluation Modules & Boards: TPS40192EVM-001
TPS40192 14V Input, 1.8V Output, 10A Evaluation Module
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: TPS40192EVM-525
10A, 12V Input, 1.8V Output Synchronous Buck Converter using the TPS40192 and NexFETВ™ MOSFETs
Lifecycle Status: Active (Recommended for new designs) - Evaluation Modules & Boards: TPS40193EVM-001
TPS40193 12V Input, 1.8V Output, 10A Evaluation Module
Lifecycle Status: Active (Recommended for new designs)
Application Notes
- TMS320C6472 5V Input Pwr Design, Integrated FET DC/DC Converters and ControllersPDF, 452 Kb, File published: Mar 26, 2010
This reference design is intended for designers who wish to design up to eight TMS320C6472 Digital Signal Processors into a system using a nominal input voltage of 5 V, with a flexible design using external FETs, and low-dropout regulators for the low-power rails. - Enabling Multiple TPS4019x DevicesPDF, 72 Kb, File published: Mar 29, 2012
- Not All Jitter Is Created Equal (Rev. A)PDF, 555 Kb, Revision: A, File published: Jul 4, 2015
This application report offers a tutorial discussion on jitter in switching DC-DC converters. Not all power supply designs are equally susceptible to jitter, nor are they equally affected by jitter. Modes of switching jitter are defined and explained for several popular control architectures, which are then analyzed for sources of jitter. An example contrasting the amount of jitter and effect on o - 'C6472 12Vin Flexible Pwr Design Using DCDC Controllers and LDOs (8x C6472)PDF, 441 Kb, File published: Mar 26, 2010
This reference design is intended for designers who wish to design up to eight TMS320C6472 Digital Signal Processors into a system using a nominal input voltage of 12 V, external FETs for design flexibility, and low-dropout regulators for the low-power rails. - Power Reference Design for the 'C6472 12V DCDC Controllers and LDOsPDF, 245 Kb, File published: Mar 26, 2010
This reference design is intended for designers who wish to design a TMS320C6472 Digital Signal Processor into a system using a nominal input voltage of 12 V external FETs for design flexibility and low-dropout regulators for the low-power rails. - 5Vin DM643x Power using DC/DC Controllers and LDOPDF, 741 Kb, File published: Oct 9, 2008
- 5Vin C642x Power using DC/DC Controllers and LDOPDF, 741 Kb, File published: Oct 9, 2008
Model Line
Series: TPS40192 (4)
- TPS40192DRCR TPS40192DRCRG4 TPS40192DRCT TPS40192DRCTG4
Manufacturer's Classification
- Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Controller (External Switch)