Datasheet Texas Instruments UCC2837D

UCC1837
UCC2837
UCC3837 8-Pin N-FET Linear Regulator Controller
FEATURES DESCRIPTION On Board Charge Pump to Drive
External N-MOSFET The UCC3837 Linear Regulator Controller includes all the features required for an extremely low dropout linear regulator that uses an external
N-channel MOSFET as the pass transistor. The device can operate from
input voltages as low as 3V and can provide high current levels, thus providing an efficient linear solution for custom processor voltages, bus termination voltages, and other logic level voltages below 3V. The on board
charge pump creates a gate drive voltage capable of driving an external
N-MOSFET which is optimal for low dropout voltage and high efficiency.
The wide versatility of this IC allows the user to optimize the setting of
both current limit and output voltage for applications beyond or between
standard 3-terminal linear regulator ranges. Input Voltage as Low as 3V Duty Ratio Mode Over Current
Protection Extremely Low Dropout Voltage Low External Parts Count Output Voltages as Low as 1.5V This 8-pin controller IC features a duty ratio current limiting technique that
provides peak transient loading capability while limiting the average
power dissipation of the pass transistor during fault conditions. See the
Application Section for detailed information. BLOCK DIAGRAM
VDD CS CAP 1 8 2
CHARGE
PUMP
CURRENT SENSE
AMPLIFIER LEVEL
SHIFT 5 VOUT 6 FB 3 GND ERROR AMPLIFIER + 140mV UVLO
1.5V REF CURRENT SENSE …