Datasheet Texas Instruments LMC6482IMMX/NOPB

ManufacturerTexas Instruments
SeriesLMC6482
Part NumberLMC6482IMMX/NOPB
Datasheet Texas Instruments LMC6482IMMX/NOPB

Ultra-low Bias Current, Precision CMOS Rail-to-Rail Input and Output Operational Amplifier 8-VSSOP -40 to 85

Datasheets

LMC6482 CMOS Dual Rail-to-Rail Input and Output Operational Amplifier datasheet
PDF, 2.9 Mb, Revision: E, File published: Apr 24, 2015
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Packaging

Pin8
Package TypeDGK
Industry STD TermVSSOP
JEDEC CodeR-PDSO-G
Package QTY3500
CarrierLARGE T&R
Device MarkingA10
Width (mm)3
Length (mm)3
Thickness (mm).97
Pitch (mm).65
Max Height (mm)1.07
Mechanical DataDownload

Parametrics

Additional FeaturesN/A
ArchitectureCMOS
CMRR(Min)65 dB
CMRR(Typ)82 dB
GBW(Typ)1.5 MHz
Input Bias Current(Max)4 pA
Iq per channel(Max)0.7 mA
Iq per channel(Typ)0.5 mA
Number of Channels2
Offset Drift(Typ)1 uV/C
Operating Temperature Range-40 to 85 C
Output Current(Typ)30 mA
Package GroupVSSOP
Package Size: mm2:W x L8VSSOP: 15 mm2: 4.9 x 3(VSSOP) PKG
Rail-to-RailIn,Out
RatingCatalog
Slew Rate(Typ)1.3 V/us
Total Supply Voltage(Max)15.5 +5V=5, +/-5V=10
Total Supply Voltage(Min)3 +5V=5, +/-5V=10
Vn at 1kHz(Typ)37 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)0.75 mV

Eco Plan

RoHSCompliant

Application Notes

  • AN-1237 RSDSв„ў Flat Panel Display Design Guidelines Part 2 (Rev. A)
    PDF, 194 Kb, Revision: A, File published: May 6, 2013
    This application report presents part 2 of the flat panel display design guidelines.
  • Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)
    PDF, 81.7 Mb, Revision: B, File published: Apr 22, 2013
    This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits.
  • AN-1234 RSDSв„ў Flat Panel Display Design Guidelines Part 1 (Rev. A)
    PDF, 245 Kb, Revision: A, File published: May 6, 2013
    This application report outlines the total system solution that Texas Instruments provides for flat panel displays (FPDs). The described design uses an reduced swing differential signaling (RSDS) interface technology for reduced power, reduced board size, reduced component count, and reduced EMI. This document is currently applicable to XGA and SXGA notebook and monitor applications.
  • AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A)
    PDF, 165 Kb, Revision: A, File published: Apr 26, 2013
    It is well known to analog experts that you can use the positive and negative inputs of an operationalamplifier to make a high-impedance current source (current pump) using a conventional operationalamplifier (op amp). This basic circuit can put out both + and - output current (or zero current) into variousloads. The theory is simple. But the practical problems involved are not so simple or

Model Line

Manufacturer's Classification

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > Precision Op Amps
EMS supplier