Datasheet Texas Instruments LM324N/NOPB

ManufacturerTexas Instruments
SeriesLM324-N
Part NumberLM324N/NOPB
Datasheet Texas Instruments LM324N/NOPB

Low Power Quad Operational Amplifier 14-PDIP 0 to 70

Datasheets

LMx24-N, LM2902-N Low-Power, Quad-Operational Amplifiers datasheet
PDF, 1.9 Mb, Revision: D, File published: Jan 26, 2015
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Packaging

Pin14
Package TypeNFF
Industry STD TermPDIP
JEDEC CodeR-PDIP-T
Package QTY25
CarrierTUBE
Device MarkingLM324N
Width (mm)6.35
Length (mm)19.177
Thickness (mm)3.429
Pitch (mm)2.54
Max Height (mm)5.33
Mechanical DataDownload

Parametrics

Additional FeaturesN/A
ArchitectureBipolar
CMRR(Min)65 dB
CMRR(Typ)85 dB
GBW(Typ)1 MHz
IIB(Max)100000 pA
Iq per channel(Max)0.3 mA
Iq per channel(Typ)0.18 mA
Number of Channels4
Offset Drift(Typ)7 uV/C
Operating Temperature Range0 to 70 C
Output Current(Typ)20 mA
Package GroupPDIP
Package Size: mm2:W x LSee datasheet (PDIP) PKG
Rail-to-RailIn to V-
RatingCatalog
Slew Rate(Typ)0.5 V/us
Total Supply Voltage(Max)32 +5V=5, +/-5V=10
Total Supply Voltage(Min)3 +5V=5, +/-5V=10
Vn at 1kHz(Typ)40 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)7 mV

Eco Plan

RoHSCompliant

Application Notes

  • Effect of Heavy Loads on Accuracy and Linearity of Op Amp Circuits (Rev. B)
    PDF, 81.7 Mb, Revision: B, File published: Apr 22, 2013
    This application report discusses the effect of heavy loads on the accuracy and linearity of operationalamplifier circuits.
  • AN-C V/F Converter ICs Handle Frequency-to-Voltage Needs (Rev. B)
    PDF, 371 Kb, Revision: B, File published: Apr 23, 2013
    Simplify your frequency-to-voltage (F/V) converter designs with versatile V/F ICs. Starting with a basicconverter circuit you can modify it to meet almost any application requirement. You can spare yourselfsome hard labor when designing F/V converters by using a voltage-to-frequency (V/F) IC in your designs.These ICs form the basis of a series of accurate yet economical F/V converters sui
  • AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A)
    PDF, 165 Kb, Revision: A, File published: Apr 26, 2013
    It is well known to analog experts that you can use the positive and negative inputs of an operationalamplifier to make a high-impedance current source (current pump) using a conventional operationalamplifier (op amp). This basic circuit can put out both + and - output current (or zero current) into variousloads. The theory is simple. But the practical problems involved are not so simple or
  • Mounting of Surface Mount Components (Rev. B)
    PDF, 5.8 Mb, Revision: B, File published: Apr 23, 2013
    Over the past few years, electronic products, and especially those which fall within the category ofConsumer Electronics, have been significantly reduced in physical size and weight. This documentprovides information about the techniques used to mount CSP size components.
  • AN-666 DTMF Generation with 3.58 MHz Crystal
    PDF, 798 Kb, File published: May 14, 2004
  • Get More Power Out of Dual or Quad Op-Amps
    PDF, 91 Kb, File published: Oct 2, 2002

Model Line

Manufacturer's Classification

  • Semiconductors > Space & High Reliability > Amplifier > Operational Amplifiers
EMS supplier