Datasheet Texas Instruments VFC320CP

VFC320
VFC 320 SBVS017A – AUGUST 2001 Voltage-to-Frequency
and Frequency-to-Voltage
CONVERTER
FEATURES DESCRIPTION в—Џ HIGH LINEARITY: 12 to 14 bits
В±0.005% max at 10kHz FS
В±0.03% max at 100kHz FS
В±0.1% typ at 1MHz FS
в—Џ V/F OR F/V CONVERSION
в—Џ 6-DECADE DYNAMIC RANGE
в—Џ GAIN DRIFT: 20ppm/В°C max
в—Џ OUTPUT TTL/CMOS COMPATIBLE The VFC320 monolithic voltage-to-frequency and frequency-tovoltage converter provides a simple low cost method of converting analog signals into digital pulses. The digital output is an
open collector and the digital pulse train repetition rate is proportional to the amplitude of the analog input voltage. Output pulses
are compatible with TTL, and CMOS logic families.
High linearity (0.005%, max at 10kHz FS) is achieved with
relatively few external components. Two external resistors and
two external capacitors are required to operate. Full scale frequency and input voltage are determined by a resistor in series
with –In and two capacitors (one-shot timing and input amplifier
integration). The other resistor is a non-critical open collector
pull-up (fOUT to +VCC). The VFC320 is available in two performance grades. The VFC320 is specified for the –25°C to +85°C,
range. APPLICATIONS
в—Џ INEXPENSIVE A/D AND D/A CONVERTER
в—Џ DIGITAL PANEL METERS …