Datasheet Texas Instruments LM5085MY/NOPB

ManufacturerTexas Instruments
SeriesLM5085
Part NumberLM5085MY/NOPB
Datasheet Texas Instruments LM5085MY/NOPB

4.5-75V Wide Vin, Constant On-Time Non-Synchronous PFET Buck Controller 8-MSOP-PowerPAD -40 to 125

Datasheets

LM5085/-Q1 75-V Constant On-Time PFET Buck Switching Controller datasheet
PDF, 1.6 Mb, Revision: I, File published: Aug 12, 2015
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Packaging

Pin8
Package TypeDGN
Industry STD TermHVSSOP
JEDEC CodeS-PDSO-G
Package QTY1000
CarrierSMALL T&R
Device MarkingSSSB
Width (mm)3
Length (mm)3
Thickness (mm)1.02
Pitch (mm).65
Max Height (mm)1.1
Mechanical DataDownload

Parametrics

Control ModeConstant on-time (COT)
Duty Cycle(Max)100 %
Iout(Max)10 A
Iq(Typ)1.3 mA
Number of Phases1
Operating Temperature Range-40 to 125 C
Package GroupMSOP-PowerPAD
RatingCatalog
Regulated Outputs1
Special FeaturesAdjustable Current Limit,Enable,Frequency Synchronization
Switching Frequency(Max)1000 kHz
Switching Frequency(Min)50 kHz
TypeController
Vin(Max)75 V
Vin(Min)4.5 V
Vout(Max)75 V
Vout(Min)1.25 V

Eco Plan

RoHSCompliant

Design Kits & Evaluation Modules

  • Evaluation Modules & Boards: LM5085EVAL
    LM5085 - 75V Wide Vin Constant On-Time PFET Buck Switching Controller Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • Constant Current Constant Voltage Buck Converter w/LM25085 (Rev. A)
    PDF, 377 Kb, Revision: A, File published: Apr 23, 2013
    In many applications, a constant-current constant-voltage (CC/CV) dc source is needed. The I-Vcharacteristic of a constant-current constant-voltage (CC/CV) source is shown in Figure 1. This applicationreport presents an external op-amp based accurate current limit circuit suitable for CC/CV operation whenthe required constant current range is very narrow.
  • Designing Non-Invert Buck-Boost (Zeta) Cnvrts w/a Buck P-FET Cntrl
    PDF, 299 Kb, File published: Apr 22, 2011
  • Transient Response versus Ripple – An Analysis of Ripple Injection Techniques
    PDF, 2.9 Mb, File published: Apr 28, 2014
    In this application note the implications of ripple injection techniques, aimed at minimizingoutput ripple voltage, on the transient response of a supply are highlighted. The results help choose a suitable ripple injection technique after striking a balance between the output ripple voltage and the transient response required by the load.
  • Reduce buck-converter EMI and voltage stress by minimizing inductive parasitics
    PDF, 926 Kb, File published: Jul 21, 2016

Model Line

Manufacturer's Classification

  • Semiconductors > Power Management > Non-isolated DC/DC Switching Regulator > Step-Down (Buck) > Buck Controller (External Switch)
EMS supplier