Datasheet Texas Instruments LMV841

ManufacturerTexas Instruments
SeriesLMV841
Datasheet Texas Instruments LMV841

CMOS Input, RRIO, Wide Supply Range Operational Amplifiers

Datasheets

LMV84x CMOS Input, RRIO, Low Power, Wide Supply Range, 4.5-MHz Operational Amplifiers datasheet
PDF, 1.7 Mb, Revision: H, File published: Jul 29, 2016
Extract from the document

Prices

Status

LMV841MG/NOPBLMV841MGX/NOPB
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityYesYes

Packaging

LMV841MG/NOPBLMV841MGX/NOPB
N12
Pin55
Package TypeDCKDCK
Industry STD TermSOT-SC70SOT-SC70
JEDEC CodeR-PDSO-GR-PDSO-G
Package QTY10003000
CarrierLARGE T&RLARGE T&R
Device MarkingA97A97
Width (mm)1.251.25
Length (mm)22
Thickness (mm).9.9
Pitch (mm).65.65
Max Height (mm)1.11.1
Mechanical DataDownloadDownload

Parametrics

Parameters / ModelsLMV841MG/NOPB
LMV841MG/NOPB
LMV841MGX/NOPB
LMV841MGX/NOPB
Additional FeaturesN/AN/A
ArchitectureCMOSCMOS
CMRR(Min), dB8686
CMRR(Typ), dB112112
GBW(Typ), MHz4.54.5
Input Bias Current(Max), pA1010
Iq per channel(Max), mA22
Iq per channel(Typ), mA1.021.02
Number of Channels11
Offset Drift(Typ), uV/C0.350.35
Operating Temperature Range, C-40 to 125-40 to 125
Output Current(Typ), mA3030
Package GroupSC70SC70
Package Size: mm2:W x L, PKG5SC70: 4 mm2: 2.1 x 2(SC70)5SC70: 4 mm2: 2.1 x 2(SC70)
Rail-to-RailIn,OutIn,Out
RatingCatalogCatalog
Slew Rate(Typ), V/us2.52.5
Total Supply Voltage(Max), +5V=5, +/-5V=101212
Total Supply Voltage(Min), +5V=5, +/-5V=102.72.7
Vn at 1kHz(Typ), nV/rtHz2020
Vos (Offset Voltage @ 25C)(Max), mV0.50.5

Eco Plan

LMV841MG/NOPBLMV841MGX/NOPB
RoHSCompliantCompliant

Application Notes

  • AN-1708 LMV841 Stability Considerations (Rev. A)
    PDF, 40 Kb, Revision: A, File published: Apr 26, 2013
    This application note provides information regarding LMV841 stability.
  • AN-1515 A Comprehensive Study of the Howland Current Pump (Rev. A)
    PDF, 165 Kb, Revision: A, File published: Apr 26, 2013
    It is well known to analog experts that you can use the positive and negative inputs of an operationalamplifier to make a high-impedance current source (current pump) using a conventional operationalamplifier (op amp). This basic circuit can put out both + and - output current (or zero current) into variousloads. The theory is simple. But the practical problems involved are not so simple or

Model Line

Series: LMV841 (2)

Manufacturer's Classification

  • Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> Precision Op Amps
EMS supplier