Datasheet Texas Instruments LMZ21701

ManufacturerTexas Instruments
SeriesLMZ21701
Datasheet Texas Instruments LMZ21701

SIMPLE SWITCHERВ® 3V to 17V, 1A High Density Nano Module

Datasheets

LMZ21701 1A SIMPLE SWITCHERВ® Nano Module with 17V Maximum Input Voltage datasheet
PDF, 2.0 Mb, Revision: D, File published: Nov 5, 2014
Extract from the document

Prices

Status

LMZ21701SILRLMZ21701SILT
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)
Manufacture's Sample AvailabilityNoYes

Packaging

LMZ21701SILRLMZ21701SILT
N12
Pin88
Package TypeSILSIL
Package QTY3000250
CarrierLARGE T&RSMALL T&R
Device Marking1701TXN7203EC

Parametrics

Parameters / ModelsLMZ21701SILR
LMZ21701SILR
LMZ21701SILT
LMZ21701SILT
Iout(Max), A11
Iq(Typ), mA0.0170.017
Operating Temperature Range, C-40 to 125-40 to 125
Package TypeMicroSiP (LGA)MicroSiP (LGA)
Regulated Outputs11
Soft StartAdjustableAdjustable
Special FeaturesEMI Tested,Enable,Light Load Efficiency,Power GoodEMI Tested,Enable,Light Load Efficiency,Power Good
Switching Frequency(Max), kHz25002500
Switching Frequency(Min), kHz12501250
Switching Frequency(Typ), kHz20002000
Vin(Max), V1717
Vin(Min), V33
Vout(Max), V66
Vout(Min), V0.90.9

Eco Plan

LMZ21701SILRLMZ21701SILT
RoHSCompliantCompliant

Application Notes

  • AN-2169 LMZ10501 and LMZ10500 SIMPLE SWITCHER Nano Module (Rev. A)
    PDF, 298 Kb, Revision: A, File published: Apr 23, 2013
    The LMZ10501 and LMZ10500 SIMPLE SWITCHER nano modules are easy-to-use DC-DC solutionsoptimized for space-constrained applications. The LMZ10501 is capable of driving up to 1A load withexcellent power conversion efficiency, line and load regulation. The LMZ10500 is a 650mA version moduleand is pin-to-pin compatible with the LMZ10501.
  • Understanding and Applying Current-Mode Control Theory
    PDF, 409 Kb, File published: Aug 19, 2007
  • AN-643 EMI/RFI Board Design (Rev. B)
    PDF, 742 Kb, Revision: B, File published: May 3, 2004
    Application Note 643 EMI/RFI Board Design
  • AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C)
    PDF, 82 Kb, Revision: C, File published: Apr 23, 2013
    When designing a high frequency switching regulated power supply layout is very important. Using agood layout can solve many problems associated with these types of supplies. The problems due to a badlayout are often seen at high current levels and are usually more obvious at large input to output voltagedifferentials. Some of the main problems are loss of regulation at high output current
  • AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A)
    PDF, 2.7 Mb, Revision: A, File published: Apr 23, 2013
    This application report shows how to measure the critical points of a bode plot with only an audiogenerator (or simple signal generator) and an oscilloscope. The method is explained in an easy to followstep-by-step manner so that a power supply designer can start performing these measurements in a shortamount of time.
  • AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B)
    PDF, 9.2 Mb, Revision: B, File published: Apr 23, 2013
    This thermal application report provides guidelines for the optimal board layout to achieve the best thermalresistance for exposed packages. The thermal resistance between junction-to-ambient (ОёJA) is highlydependent on the PCB (Printed Circuit Board) design factors. This becomes more critical for packageshaving very low thermal resistance between junction-to-case such as exposed pad TSSOP
  • AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A)
    PDF, 3.6 Mb, Revision: A, File published: Apr 23, 2013
    This application note will explore how the layout of your DC/DC power supply can significantly affect theamount of EMI that it produces. It will discuss several variations of a layout analyze the results andprovide answers to some common EMI questions such whether or not to use a shielded inductor.
  • AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C)
    PDF, 374 Kb, Revision: C, File published: Apr 23, 2013
    This application report provides SIMPLE SWITCHER™ PCB layout guidelines.
  • AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C)
    PDF, 2.5 Mb, Revision: C, File published: Apr 24, 2013
    Electromagnetic Interference (EMI) is an unwanted effect between two electrical systems as a result ofeither electromagnetic radiation or electromagnetic conduction. EMI is the major adverse effect caused bythe application of switch-mode power supplies (SMPS). In switching power supplies EMI noise isunavoidable due to the switching actions of the semiconductor devices and resulting disconti
  • Semiconductor and IC Package Thermal Metrics (Rev. C)
    PDF, 201 Kb, Revision: C, File published: Apr 19, 2016
  • Input and Output Capacitor Selection
    PDF, 219 Kb, File published: Sep 19, 2005

Model Line

Series: LMZ21701 (2)

Manufacturer's Classification

  • Semiconductors> Power Management> Power Modules> Non-Isolated Module> Step-Down (Buck) Module
EMS supplier