Datasheet Texas Instruments OPA172-Q1
| Manufacturer | Texas Instruments |
| Series | OPA172-Q1 |
Datasheets
OPAx172-Q1 36-V, Single-Supply, 10-MHz, Rail-to-Rail Output Automotive Grade Operational Amplifiers datasheet
PDF, 2.9 Mb, Revision: A, File published: Jun 20, 2017
Prices
Status
| OPA172QDBVRQ1 | OPA172QDBVTQ1 | |
|---|---|---|
| Lifecycle Status | Preview (Device has been announced but is not in production. Samples may or may not be available) | Preview (Device has been announced but is not in production. Samples may or may not be available) |
| Manufacture's Sample Availability | No | No |
Packaging
| OPA172QDBVRQ1 | OPA172QDBVTQ1 | |
|---|---|---|
| N | 1 | 2 |
| Pin | 5 | 5 |
| Package Type | DBV | DBV |
| Industry STD Term | SOT-23 | SOT-23 |
| JEDEC Code | R-PDSO-G | R-PDSO-G |
| Package QTY | 3000 | 250 |
| Carrier | LARGE T&R | LARGE T&R |
| Width (mm) | 1.6 | 1.6 |
| Length (mm) | 2.9 | 2.9 |
| Thickness (mm) | 1.2 | 1.2 |
| Pitch (mm) | .95 | .95 |
| Max Height (mm) | 1.45 | 1.45 |
| Mechanical Data | Download | Download |
Parametrics
| Parameters / Models | OPA172QDBVRQ1 | OPA172QDBVTQ1 |
|---|---|---|
| Additional Features | EMI Hardened | EMI Hardened |
| Architecture | CMOS | CMOS |
| CMRR(Typ), dB | 120 | 120 |
| GBW(Typ), MHz | 10 | 10 |
| Input Bias Current(Max), pA | 15 | 15 |
| Iq per channel(Typ), mA | 1.6 | 1.6 |
| Number of Channels | 1 | 1 |
| Offset Drift(Typ), uV/C | 0.3 | 0.3 |
| Operating Temperature Range, C | -40 to 125 | -40 to 125 |
| Output Current(Typ), mA | 75 | 75 |
| Package Group | SOT-23 | SOT-23 |
| Package Size: mm2:W x L, PKG | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) | 5SOT-23: 8 mm2: 2.8 x 2.9(SOT-23) |
| Rail-to-Rail | In to V-,Out | In to V-,Out |
| Rating | Automotive | Automotive |
| Slew Rate(Typ), V/us | 10 | 10 |
| Total Supply Voltage(Max), +5V=5, +/-5V=10 | 36 | 36 |
| Total Supply Voltage(Min), +5V=5, +/-5V=10 | 4.5 | 4.5 |
| Vn at 1kHz(Typ), nV/rtHz | 7 | 7 |
| Vos (Offset Voltage @ 25C)(Max), mV | 1 | 1 |
Eco Plan
| OPA172QDBVRQ1 | OPA172QDBVTQ1 | |
|---|---|---|
| RoHS | See ti.com | See ti.com |
Application Notes
- Compensate Transimpedance Amplifiers Intuitively (Rev. A)PDF, 69 Kb, Revision: A, File published: Mar 30, 2005
Transimpedance amplifiers are used to convert low-level photodiode currents to usable voltage signals. All too often, the amplifiers have to be empirically compensated to operate properly. The problem can be easily understood if one looks at all the elements involved. - Tuning in AmplifiersPDF, 44 Kb, File published: Oct 2, 2000
Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil - Single-Supply Operation of Operational AmplifiersPDF, 77 Kb, File published: Oct 2, 2000
Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation. - Op Amp Performance AnalysisPDF, 76 Kb, File published: Oct 2, 2000
This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte
Model Line
Series: OPA172-Q1 (2)
Manufacturer's Classification
- Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> Precision Op Amps
