Datasheet Texas Instruments OPA2614

ManufacturerTexas Instruments
SeriesOPA2614
Datasheet Texas Instruments OPA2614

Dual, High Gain Bandwidth, High Output Current, Operational Amplifier with Current Limit

Datasheets

Dual, High Gain Bandwidth, High Output Current, Op Amp with Current Limit datasheet
PDF, 722 Kb, Revision: D, File published: Aug 28, 2008
Extract from the document

Prices

Status

OPA2614IDOPA2614IDG4OPA2614IDROPA2614IDRG4OPA2614IDTJOPA2614IDTJG3OPA2614IDTJROPA2614IDTJRG3
Lifecycle StatusActive (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Active (Recommended for new designs)Obsolete (Manufacturer has discontinued the production of the device)Obsolete (Manufacturer has discontinued the production of the device)Obsolete (Manufacturer has discontinued the production of the device)Obsolete (Manufacturer has discontinued the production of the device)
Manufacture's Sample AvailabilityNoNoNoNoNoNoNoNo

Packaging

OPA2614IDOPA2614IDG4OPA2614IDROPA2614IDRG4OPA2614IDTJOPA2614IDTJG3OPA2614IDTJROPA2614IDTJRG3
N12345678
Pin88888888
Package TypeDDDDDTJDTJDTJDTJ
Industry STD TermSOICSOICSOICSOICHSOICHSOICHSOICHSOIC
JEDEC CodeR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-GR-PDSO-G
Package QTY757525002500
CarrierTUBETUBELARGE T&RLARGE T&R
Device Marking2614OPA2614OPA
Width (mm)3.913.913.913.913.93.93.93.9
Length (mm)4.94.94.94.94.894.894.894.89
Thickness (mm)1.581.581.581.581.391.391.391.39
Pitch (mm)1.271.271.271.271.271.271.271.27
Max Height (mm)1.751.751.751.751.751.751.751.75
Mechanical DataDownloadDownloadDownloadDownloadDownloadDownloadDownloadDownload

Parametrics

Parameters / ModelsOPA2614ID
OPA2614ID
OPA2614IDG4
OPA2614IDG4
OPA2614IDR
OPA2614IDR
OPA2614IDRG4
OPA2614IDRG4
OPA2614IDTJ
OPA2614IDTJ
OPA2614IDTJG3
OPA2614IDTJG3
OPA2614IDTJR
OPA2614IDTJR
OPA2614IDTJRG3
OPA2614IDTJRG3
2nd Harmonic, dBc65656565
2nd Harmonic(dBc)65656565
3rd Harmonic, dBc87878787
3rd Harmonic(dBc)87878787
@ MHz11111111
Acl, min spec gain, V/V2222
Acl, min spec gain(V/V)2222
Additional FeaturesDecompensatedDecompensatedDecompensatedDecompensatedDecompensatedDecompensatedDecompensatedDecompensated
Approx. Price (US$)1.95 | 1ku1.95 | 1ku1.95 | 1ku1.95 | 1ku
ArchitectureBipolar,Voltage FBBipolar,Voltage FBBipolar,Voltage FBBipolar,Voltage FBBipolar
Voltage FB
Bipolar
Voltage FB
Bipolar
Voltage FB
Bipolar
Voltage FB
BW @ Acl, MHz180180180180
BW @ Acl(MHz)180180180180
CMRR(Min), dB88888888
CMRR(Min)(dB)88888888
CMRR(Typ), dB100100100100
CMRR(Typ)(dB)100100100100
GBW(Typ), MHz290290290290
GBW(Typ)(MHz)290290290290
Input Bias Current(Max), pA12000120001200012000
Input Bias Current(Max)(pA)12000120001200012000
Iq per channel(Max), mA6.26.26.26.2
Iq per channel(Max)(mA)6.26.26.26.2
Iq per channel(Typ), mA6666
Iq per channel(Typ)(mA)6666
Number of Channels2222
Number of Channels(#)2222
Offset Drift(Typ), uV/C3.33.33.33.3
Offset Drift(Typ)(uV/C)3.33.33.33.3
Operating Temperature Range, C-40 to 85-40 to 85-40 to 85-40 to 85
Operating Temperature Range(C)-40 to 85-40 to 85-40 to 85-40 to 85
Output Current(Typ), mA350350350350
Output Current(Typ)(mA)350350350350
Package GroupSOICSOICSOICSOICSOICSOICSOICSOIC
Package Size: mm2:W x L, PKG8SOIC: 29 mm2: 6 x 4.9(SOIC)8SOIC: 29 mm2: 6 x 4.9(SOIC)8SOIC: 29 mm2: 6 x 4.9(SOIC)8SOIC: 29 mm2: 6 x 4.9(SOIC)
Package Size: mm2:W x L (PKG)8SOIC: 29 mm2: 6 x 4.9(SOIC)8SOIC: 29 mm2: 6 x 4.9(SOIC)8SOIC: 29 mm2: 6 x 4.9(SOIC)8SOIC: 29 mm2: 6 x 4.9(SOIC)
Rail-to-RailNoNoNoNoNoNoNoNo
RatingCatalogCatalogCatalogCatalogCatalogCatalogCatalogCatalog
Slew Rate(Typ), V/us145145145145
Slew Rate(Typ)(V/us)145145145145
Total Supply Voltage(Max), +5V=5, +/-5V=1012121212
Total Supply Voltage(Max)(+5V=5, +/-5V=10)12121212
Total Supply Voltage(Min), +5V=5, +/-5V=105555
Total Supply Voltage(Min)(+5V=5, +/-5V=10)5555
Vn at 1kHz(Typ), nV/rtHz1.81.81.81.8
Vn at Flatband(Typ), nV/rtHz1.81.81.81.8
Vn at Flatband(Typ)(nV/rtHz)1.81.81.81.8
Vos (Offset Voltage @ 25C)(Max), mV1111
Vos (Offset Voltage @ 25C)(Max)(mV)1111

Eco Plan

OPA2614IDOPA2614IDG4OPA2614IDROPA2614IDRG4OPA2614IDTJOPA2614IDTJG3OPA2614IDTJROPA2614IDTJRG3
RoHSCompliantCompliantCompliantCompliantNot CompliantNot CompliantNot CompliantNot Compliant
Pb FreeNoNoNoNo

Application Notes

  • Active Output Impedance for ADSL Line Drivers
    PDF, 636 Kb, File published: Nov 26, 2002
    Signal termination is very common in bidirectional communication systems. Termination allows for receiving signals while transmitting different signals at the same time. With the increasing popularity of asymmetrical digital subscriber lines (ADSL), the requirement for a low power line driver amplifier combined with line termination becomes a very difficult goal. This application note examines the
  • RLC Filter Design for ADC Interface Applications (Rev. A)
    PDF, 299 Kb, Revision: A, File published: May 13, 2015
    As high performance Analog-to-Digital Converters (ADCs) continue to improve in their performance, the last stage interface from the final amplifier into the converter inputs becomes a critical element in the system design if the full converter dynamic range is desired. This application note describes the performance and design equations for a simple passive 2nd-order filter used successfully in AD
  • ADS5500, OPA695: PC Board Layout for Low Distortion High-Speed ADC Drivers
    PDF, 273 Kb, File published: Apr 22, 2004
    Once an analog-to-digital converter (ADC) and a driver/interface have been selected for a given application, the next step to achieving excellent performance is laying out the printed circuit board (PCB) that will support the application. This application report describes several techniques for optimizing a high-speed, 14-bit performance, differential driver PCB layout using a wideband operation
  • Measuring Board Parasitics in High-Speed Analog Design
    PDF, 134 Kb, File published: Jul 7, 2003
    Successful circuit designs using high-speed amplifiers can depend upon understanding and identifying parasitic PCB components. Simulating a design while including PCB parasitics can protect against unpleasant production surprises. This application report discusses an easy method for measuring parasitic components in a prototype or final PC board design by using a standard oscilloscope and low freq
  • Noise Analysis for High Speed Op Amps (Rev. A)
    PDF, 256 Kb, Revision: A, File published: Jan 17, 2005
    As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu
  • Tuning in Amplifiers
    PDF, 44 Kb, File published: Oct 2, 2000
    Have you ever had the experience of designing an analog gain block with an amplifier that is specified to be unity gain stable only to find that it is oscillating out of control in your circuit? Or have you ever replaced a stable voltage feedback amplifier with a current feedback amplifier to find that the current feedback amplifier immediately oscillates when placed in the amplifier socket? Oscil
  • Single-Supply Operation of Operational Amplifiers
    PDF, 77 Kb, File published: Oct 2, 2000
    Operation of op amps from single supply voltages is useful when negative supply voltages are not available. Furthermore, certain applications using high voltage and high current op amps can derive important benefits from single supply operation.
  • Op Amp Performance Analysis
    PDF, 76 Kb, File published: Oct 2, 2000
    This bulletin reflects the analysis power gained through knowledge of an op amp circuit's feedback factor. Feedback dictates the performance of an op amp both in function and in quality. The major specifications of the amplifier descibe an open-loop device awaiting feedback direction of the end circuit's function. Just how well the amplifier performs the function reflects through the feedback inte

Model Line

Manufacturer's Classification

  • Semiconductors> Amplifiers> Operational Amplifiers (Op Amps)> High-Speed Op Amps (>=50MHz)
EMS supplier