Datasheet Texas Instruments 5962-8944401FA
Manufacturer | Texas Instruments |
Series | SN54LS597 |
Part Number | 5962-8944401FA |
8-Bit Shift Registers With Input Latches 16-CFP -55 to 125
Datasheets
8-Bit Shift Registers With Input Latches datasheet
PDF, 636 Kb, File published: Mar 1, 1988
Extract from the document
Prices
Status
Lifecycle Status | Active (Recommended for new designs) |
Manufacture's Sample Availability | No |
Packaging
Pin | 16 |
Package Type | W |
Industry STD Term | CFP |
JEDEC Code | R-GDFP-F |
Package QTY | 1 |
Carrier | TUBE |
Width (mm) | 6.73 |
Length (mm) | 10.3 |
Thickness (mm) | 1.65 |
Pitch (mm) | 1.27 |
Max Height (mm) | 2.03 |
Mechanical Data | Download |
Parametrics
3-State Output | No |
Bits | 8 |
F @ Nom Voltage(Max) | 35 Mhz |
ICC @ Nom Voltage(Max) | 53 mA |
Input Type | TTL |
Operating Temperature Range | -55 to 125 C |
Output Drive (IOL/IOH)(Max) | 24/-2.6 mA |
Output Type | TTL |
Package Group | CFP |
Package Size: mm2:W x L | See datasheet (CFP) PKG |
Rating | Military |
Technology Family | LS |
VCC(Max) | 5.25 V |
VCC(Min) | 4.75 V |
tpd @ Nom Voltage(Max) | 30 ns |
Eco Plan
RoHS | See ti.com |
Application Notes
- Semiconductor Packing Material Electrostatic Discharge (ESD) ProtectionPDF, 337 Kb, File published: Jul 8, 2004
Forty-eight-pin TSSOP components that were packaged using Texas Instruments (TI) standard packing methodology were subjected to electrical discharges between 0.5 and 20 kV as generated by an IEC ESD simulator to determine the level of ISD protection provided by the packing materials. The testing included trays tape and reel and magazines. Additional units were subjected to the same discharge - Introduction to LogicPDF, 93 Kb, File published: Apr 30, 2015
- Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)PDF, 614 Kb, Revision: C, File published: Dec 2, 2015
- Live InsertionPDF, 150 Kb, File published: Oct 1, 1996
Many applications require the ability to exchange modules in electronic systems without removing the supply voltage from the module (live insertion). For example an electronic telephone exchange must always remain operational even during module maintenance and repair. To avoid damaging components additional circuitry modifications are necessary. This document describes in detail the phenomena tha - Designing with the SN54/74LS123 (Rev. A)PDF, 118 Kb, Revision: A, File published: Mar 1, 1997
The Texas Instruments (TI) SN54/74LS123 dual retriggerable monostable multivibrator is a one-shot device capable of verylong output pulses and up to 100% duty cycle. The ?LS123 also features dc triggering from gated low-level active A andhigh-level active B inputs and provides a clear input that terminates the output pulse of any predetermined time independentof timing components R ext and - Power-Up Behavior of Clocked Devices (Rev. A)PDF, 34 Kb, Revision: A, File published: Feb 6, 2015
- Input and Output Characteristics of Digital Integrated CircuitsPDF, 1.7 Mb, File published: Oct 1, 1996
This report contains a comprehensive collection of the input and output characteristic curves of typical integrated circuits from various logic families. These curves go beyond the information given in data sheets by providing additional details regarding the characteristics of the components. This knowledge is particularly useful when for example a decision must be made as to which circuit shou - Designing With Logic (Rev. C)PDF, 186 Kb, Revision: C, File published: Jun 1, 1997
Data sheets which usually give information on device behavior only under recommended operating conditions may only partially answer engineering questions that arise during the development of systems using logic devices. However information is frequently needed regarding the behavior of the device outside the conditions in the data sheet. Such questions might be:?How does a bus driver behave w - TI IBIS File Creation Validation and Distribution ProcessesPDF, 380 Kb, File published: Aug 29, 2002
The Input/Output Buffer Information Specification (IBIS) also known as ANSI/EIA-656 has become widely accepted among electronic design automation (EDA) vendors semiconductor vendors and system designers as the format for digital electrical interface data. Because IBIS models do not reveal proprietary internal processes or architectural information semiconductor vendors? support for IBIS con
Model Line
Series: SN54LS597 (6)
- 5962-89444012A 5962-8944401EA 5962-8944401FA SNJ54LS597FK SNJ54LS597J SNJ54LS597W
Manufacturer's Classification
- Semiconductors > Space & High Reliability > Logic Products > Flip-Flop/Latch/Registers
Other Names:
59628944401FA, 5962 8944401FA