Datasheet Linear Technology LT6012IS#TRPBF

Datasheets

Packaging

Parametrics

Eco Plan

Other Options

LT6011 LT6011

Articles

• Download
  Low Noise, Micropower Precision Op Amp Swings Outputs from Rail to Rail &mdash LT Journal
  PDF, 253 Kb, File published: Sep 1, 2003
  Extract from the document

  DESIGN FEATURES Low Noise, Micropower Precision Op
  Amp Swings Outputs from Rail to Rail
  by Kris Lokere and Glen Brisebois Introduction for the LT6011), the requirement to
  stay 1V away from either rail leaves
  less than 1V for the sensor signal, severely reducing the dynamic range. The
  LT6011 allows the outputs to swing
  to 40mV from either supply rail, making it practical in low supply voltage
  applications.
  In portable instrumentation, medical applications, or in sophisticated
  systems that measure hundreds or
  even thousands of variables simultaneously, the power consumption
  of the precision op amp is important.
  This is especially so because designers
  usually want to burn as much of the
  available power in the sensor itself,
  since this tends to reduce noise. The
  LT6011 suits all these applications
  because the supply current is less
  than 150µA per amplifier—instead
  of the milliamps of other precision
  amplifiers. In addition, micropower
  operation has the obvious benefits
  of increasing battery run time and …

Model Line

Manufacturer's Classification

• Signal Conditioning > Amplifiers > Operational Amplifiers (Op Amps) > High Voltage Amplifiers (>12V) | Precision Amplifiers (Vos | Low Power Amplifiers (Is < 1mA/amp) | Low Bias Current Amplifiers (Ib < 100pA) | Rail-to-Rail Amplifiers

Other Names:

LT6012ISTRPBF, LT6012IS TRPBF