Datasheet Linear Technology LT1766EGN-5#TRPBF

Datasheets

Packaging

Parametrics

Eco Plan

Design Notes

• Download
  60V Step-Down DC/DC Converter Maintains High Efficiency &mdash DN269
  PDF, 81 Kb, File published: Oct 1, 2001
  Extract from the document

  advertisement 60V Step-Down DC/DC Converter Maintains High Efficiency
  Design Note 269
  Mark W. Marosek
  Introduction
  Monolithic step-down converters capable of operation at
  high input voltages are usually optimized for efficiency
  at high input-to-output voltage differentials. At such low
  duty cycle operation where DC switch losses are less
  critical, the switch design is often neglected, resulting in
  a switch resistance that (for some 1.5A converters) can
  be as poor as 1Ω. Such converters sacrifice efficiency
  when lower input-to-output voltage differentials are
  required. The switch drop can also limit maximum duty
  cycle—putting a limit on the minimum input voltage
  for a given regulated output voltage.
  The LT®1766 is designed to optimize efficiency for both
  high and low input-to-output voltage differentials to
  support a wide input voltage range. In addition, the
  current mode topology used to provide fast transient
  response and good loop stability does not suffer from
  peak switch current fall off at low input-to-output voltage differentials, commonplace in most current mode
  converters.
  The LT1766 is a 1.5A monolithic buck switching regulator. The 5.5V to 60V input voltage range makes the …

• Download
  High Voltage Buck Regualtors provide High Current, Low Profile Power Solutions for FireWire Peripherals &mdash DN287
  PDF, 80 Kb, File published: Jun 1, 2002
  Extract from the document

  advertisement High Voltage Buck Regulators Provide High Current, Low
  Profile Power Solutions for FireWire Peripherals – Design Note 287
  Keith Szolusha
  Introduction
  Faster data transfer requirements between a personal
  computer and an increasing number of peripheral devices have boosted the popularity of the IEEE 1394 High
  Performance Serial Bus (FireWire technology), which
  enables speeds up to 400Mbps. FireWire technology
  is п¬Ѓnding its way into real time data transfer and data
  intensive devices such as DVD players, digital video
  recorders, zip drives and CDRW drives. There is a
  growing need for cost effective, low profile, low ripple
  DC/DC power supplies that provide 5V and 3.3V peripheral power directly from the FireWire cable at high
  currents (1A or greater). The LTВ®1766 and LT3430 current mode regulators will satisfy these requirements.
  Circuit Descriptions
  FireWire power sources, such as personal computers,
  provide 8V to 40V to the FireWire serial bus at currents
  of up to 1.5A and can power up to 16 peripherals while
  transferring data synchronously or asynchronously.
  Power sink peripherals, which do not supply power
  to the serial bus, receive power from the serial bus
  via the two power pins of the 6-pin FireWire port.
  Each peripheral must include an internal DC/DC …

Articles

• Download
  60V/3A Step-Down DC/DC Converter Maintains High Efficiency over a Wide Range of Input Voltages &mdash LT Journal
  PDF, 179 Kb, File published: Aug 9, 2004
  Extract from the document

  DESIGN FEATURES 60V/3A Step-Down DC/DC Converter
  Maintains High Efficiency over a Wide
  by Mark W. Marosek
  Range of Input Voltages
  Introduction
  sients as high as 60V). It is designed
  to maintain excellent efficiencies at
  both high and low input-to-output
  voltage differentials over a wide input
  voltage range. Its current mode architecture adds flexible frequency
  compensation with no restriction on
  the use of a ceramic output capacitor—resulting in small solutions with
  extremely low output ripple voltage.
  The LT3430 is pin compatible with
  the LT1766 (60V, 1.5A, 200kHz) and
  LT1956 (60V transient, 1.5A, 500kHz)
  step down DC/DC converters.1 The LT3430 is a monolithic step-down
  DC/DC converter that features a 3A
  peak switch current limit and the
  ability to operate with up to 60V input. The LT3430 runs at a fixed
  frequency of 200kHz and is packaged
  in a small thermally enhanced 16-pin
  TSSOP package to save space and …

• Download
  LT1766: 1.5A Converter Runs Directly from 60V DC &mdash LT Journal
  PDF, 159 Kb, File published: May 1, 2001
  Extract from the document

  DESIGN FEATURES LT1766: 1.5A Converter Runs Directly
  from 60V DC
  by Mark W. Marosek
  Introduction
  With a maximum input voltage capability of 60V and peak switch current
  of 1.5A, the LT1766 is targeted for
  high voltage, industrial and automotive applications. The 60V maximum
  operating input voltage makes the
  LT1766 ideal for 12V, 24V and (future)
  42V automotive systems, which must
  survive load-dump input transients
  as high as 60V. At high input-tooutput voltage differentials, power
  dissipation is minimized by providing
  very fast switch edge rates and by
  using a BIAS pin connected to the
  regulated output to supply internal
  control circuitry. At low input-tooutput voltage dif ferentials, a
  VIN supply-boost capacitor is used to fully
  saturate an internal 200mΩ power
  switch to reduce DC switch losses.
  The LT1766 runs at a fixed frequency
  of 200kHz and can be externally synchronized. In addition, a pin is
  provided for programming undervoltage lockout and placing the part into …

Model Line

Manufacturer's Classification

• Power Management > Switching Regulator > Step-Down (Buck) Regulators > Internal Power Switch Buck | High Input Voltage Buck
• Space & Harsh Environment > Extended Temperature Plastic (H & MP) > Extended Temperature (H & MP) Switching Regulators

Other Names:

LT1766EGN-5TRPBF, LT1766EGN-5 TRPBF, LT1766EGN5#TRPBF, LT1766EGN 5#TRPBF