Datasheet Linear Technology LTC3526LEDC#PBF

Manufacturer	Linear Technology
Series	LTC3526L
Part Number	LTC3526LEDC#PBF

550mA 1MHz Synchronous Step-Up DC/DC Converters in 2mm × 2mm DFN

Datasheets

Preview and Download

PDF, 352 Kb, Language: en, File uploaded: Sep 21, 2017, Pages: 16
550mA 1MHz Synchronous Step-Up DC/DC Converters in 2mm × 2mm DFN

Extract from the document

Packaging

Package	2x2 DFN-6
Package Code	DC6
Package Index	05-08-1703

Parametrics

Demo Boards	DC1053A-E,DC1053A-F
Design Tools	LTspice File
Export Control	no
Features	Output Disconnect, Burst Mode
Number of Outputs	1
Operating Temperature Range	0 to 85 °C
Subname	LTC3526L
Topology	Boost
Vin Max	5 V
Vin Min	0.5 V

Eco Plan

RoHS

Compliant

Other Options

LTC3526LB

Design Notes

Download
Tiny Synchronous Step-Up Converter Starts Up at 700mV &mdash DN428
PDF, 79 Kb, File published: Oct 30, 2007
Extract from the document
advertisement Tiny Synchronous Step-Up Converter Starts Up at 700mV
Design Note 428 Lower Start-Up Devices for Energy Harvesting
Work Below 100mVвЂ”See the LTC3108 Dave Salerno
Introduction
Alkaline batteries are convenient because theyвЂ™re easy to
п¬Ѓnd and relatively inexpensive, making them the power
source of choice for portable instruments and devices
used for outdoor recreation. Their long shelf life also
makes them an excellent choice for emergency equipment
that may see infrequent use but must be ready to go on a
momentвЂ™s notice. It is important that the DC/DC converters in portable devices operate over the widest possible
battery voltage range to extend battery run time, and thus
save the user from frequent battery replacement.
Single-cell alkaline batteries, with a 1.6V to 0.9V range,
present a special challenge to DC/DC converters because
of their low voltage and the fact that their internal resistance increases as the battery discharges. Thus, a DC/DC
converter that can both start up and operate efп¬Ѓciently at
low input voltages is ideally suited for single-cell alkaline
products.
The LTC В®3526L is a 1MHz, 550mA synchronous stepup (boost) converter with a wide input voltage range of
0.7V to 5V and an output voltage range of 1.5V to 5.25V.
Housed in a 2mm Г— 2mm DFN package, the LTC3526L has a typical startup voltage of just 700mV, with operation
down to 400mV once started. Despite the LTC3526LвЂ™s …

Model Line

Series: LTC3526L (6)

LTC3526LBEDC#PBF LTC3526LBEDC#TRMPBF LTC3526LBEDC#TRPBF LTC3526LEDC#PBF LTC3526LEDC#TRMPBF LTC3526LEDC#TRPBF

Manufacturer's Classification

Power Management > Switching Regulator > Step-Up (Boost) Regulators > Micropower Boost | Internal Power Switch Boost
Power Management > Energy Harvesting

Other Names:

LTC3526LEDCPBF, LTC3526LEDC PBF