Datasheet Linear Technology LTC1545

Manufacturer	Linear Technology
Series	LTC1545

Software-Selectable Multiprotocol Transceiver

Datasheets

Download

PDF, 270 Kb, Revision: AS, File uploaded: Nov 12, 2017

Extract from the document

Packaging

	LTC1545CG#PBF	LTC1545CG#TRPBF	LTC1545IG#PBF	LTC1545IG#TRPBF
N	1	2	3	4
Package	SSOP-36 Package Outline Drawing	SSOP-36 Package Outline Drawing	SSOP-36 Package Outline Drawing	SSOP-36 Package Outline Drawing
Package Code	G	G	G	G
Package Index	05-08-1640 (G36)	05-08-1640 (G36)	05-08-1640 (G36)	05-08-1640 (G36)
Pin Count	36	36	36	36

Parametrics

Parameters / Models	LTC1545CG#PBF	LTC1545CG#TRPBF	LTC1545IG#PBF	LTC1545IG#TRPBF
DCE or DTE	DTE or DCE	DTE or DCE	DTE or DCE	DTE or DCE
Demo Boards	DC327A	DC327A	DC327A	DC327A
Drivers	5	5	5	5
ESD, kV	2	2	2	2
Export Control	no	no	no	no
Multiprotocol Data Rate	10Mbps (V.35 Async), 5Mbps (V.35 Sync), 100kbps (RS232/RS562), 10Mbps (RS422/RS485)	10Mbps (V.35 Async), 5Mbps (V.35 Sync), 100kbps (RS232/RS562), 10Mbps (RS422/RS485)	10Mbps (V.35 Async), 5Mbps (V.35 Sync), 100kbps (RS232/RS562), 10Mbps (RS422/RS485)	10Mbps (V.35 Async), 5Mbps (V.35 Sync), 100kbps (RS232/RS562), 10Mbps (RS422/RS485)
Operating Temperature Range, °C	0 to 70	0 to 70	-40 to 85	-40 to 85
Protocols Supported	EIA530, EIA530-A, RS232, RS449, V.35, V.36, X.21	EIA530, EIA530-A, RS232, RS449, V.35, V.36, X.21	EIA530, EIA530-A, RS232, RS449, V.35, V.36, X.21	EIA530, EIA530-A, RS232, RS449, V.35, V.36, X.21
Receivers	5	5	5	5
Signals	Control	Control	Control	Control
Supply Voltage Range	5V	5V	5V	5V

Eco Plan

	LTC1545CG#PBF	LTC1545CG#TRPBF	LTC1545IG#PBF	LTC1545IG#TRPBF
RoHS	Compliant	Compliant	Compliant	Compliant

Articles

Download
LTC1546 Multiprotocol Chip Simplifies NET1-, NET2- and TBR2-Compliant NET1-, NET2- and TBR2-Compliant &mdash LT Journal
PDF, 174 Kb, File published: Feb 1, 2000
Extract from the document
DESIGN INFORMATION LTC1546 Multiprotocol Chip Simplifies
NET1-, NET2-and TBR2-Compliant
Serial Interfaces
by Dan Eddleman
ports the V.28 (RS232), V.35, V.36,
X.21, RS449, EIA530 and EIA530-A
protocols, including all of the necessary cable termination. With these
two chips, the physical layer of a
NET1-, NET2-and TBR2-compliant C3
1ВµF VCC
5V C1
1ВµF 3 28 1 27
26 CHARGE
PUMP 2
4 25 C5
1ВµF LTC1546
5 DTE_TXD/DCE_RXD D1 6 DTE_SCTE/DCE_RXC T D2 T C2
1ВµF + The LTC1546 multiprotocol transceiver simplifies network interface
design and frees up valuable PC board
real estate. Operating from a single
5V supply, the LTC1546 and LTC1544
form a complete, software-selectable
DTE or DCE interface port that sup-C4 …
Download
Net1 and Net2 Serial Interface Chip Set Supports Test Mode &mdash LT Journal
PDF, 246 Kb, File published: Nov 1, 1998
Extract from the document
DESIGN INFORMATION
Trace A is the time-corrected input
pulse and trace B the residue amplifier output. The light compensation
permits very fast slewing but excessive
ringing amplitude over a protracted
time results. The ringing is so severe
that it feeds through during a portion
of the sample gate off-period, although
no overdrive results. When sampling
is initiated (just prior to the sixth
vertical division) the ringing is seen to
be in its final stages, although still offensive. Total settling time is about
2.8Вµ s. Figure 9 presents the opposite
extreme. Here, a large value compensation capacitor eliminates all ringing
but slows down the amplifier so much
that settling stretches out to 3.3Вµs.
The best case appears in Figure 10.
This photo was taken with the compensation capacitor carefully chosen
for the best possible settling time.
Damping is tightly controlled and settling time goes down to 1.7Вµ s. A = 5V/DIV Settling Times
of Various Amplifiers
The previous results, using the
LT1468 amplifier, provide extremely …

Model Line

Series: LTC1545 (4)

LTC1545CG#PBF LTC1545CG#TRPBF LTC1545IG#PBF LTC1545IG#TRPBF

Manufacturer's Classification

Interface > Multiprotocol Transceivers