Datasheet Microchip MCP47FVB22A1T-E/ST

MCP47FVBXX
8-/10-/12-Bit Single/Dual Voltage Output Volatile
Digital-to-Analog Converters with I²C™ Interface
Features
• Operating Voltage Range:
-2.7V to 5.5V – Full Specifications
-1.8V to 2.7V – Reduced Device Specifications
• Output Voltage Resolutions:
-8-bit: MCP47FVB0X (256 Steps)
-10-bit: MCP47FVB1X (1024 Steps)
-12-bit: MCP47FVB2X (4096 Steps)
• Rail-to-Rail Output
• Fast Settling Time of 6 µs (typical)
• DAC Voltage Reference Source Options:
-Device VDD
-External VREF pin (buffered or unbuffered)
-Internal Band Gap (1.22V typical)
• Output Gain Options:
-(1x) Unity
-2x (when not using internal VDD as voltage
source)
• Power-on/Brown-out Reset Protection
• Power-Down Modes: …

MCP47FXBXX
Typical Performance Curves
1.0 TYPICAL PERFORMANCE CURVES Note: The following performance graphs are for the devices that are documented in the MCP47FEBXX data
sheet (DS20005375A). This document allows the MCP47FEBXX data sheet’s functional description to be
in PDF format with a file size smaller than the 10 MB limit of many email file servers.
The graphs and tables provided following this note are a statistical summary based on a limited number of
samples and are provided for informational purposes only. The performance characteristics listed herein
are not tested or guaranteed. In some graphs or tables, the data presented may be outside the specified
operating range (e.g., outside specified power supply range) and therefore outside the warranted range. Note: Unless otherwise indicated, TA = +25°C, VDD = 5.5V.
5.5V, FCLK = 3.4MHz 550
500
450
IDD (uA) 400
350
300
250
200
150 VDD Mode -Single
Bandgap Mode -Single
VREF Unbuf -Single
VREF Buf -Single VDD Mode -Dual
Bandgap Mode -Dual
VREF Unbuf -Dual …