Datasheet LM6132AIM - National Semiconductor AMP DUAL 7 MHz RRI/O, 6132, SOIC8

National Semiconductor LM6132AIM

Part Number: LM6132AIM

Detailed Description

Manufacturer: National Semiconductor

Description: AMP DUAL 7 MHz RRI/O, 6132, SOIC8

Docket:
LM6132 and LM6134 Dual and Quad, Low Power 10 MHz Rail-to-Rail I/O Operational Amplifiers
November 2004
LM6132/LM6134 Dual and Quad Low Power 10 MHz Rail-to-Rail I/O Operational Amplifiers
General Description
The LM6132/34 provides new levels of speed vs.

power performance in applications where low voltage supplies or power limitations previously made compromise necessary. With only 360 µA/amp supply current, the 10 MHz gainbandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life. The LM6132/34 can be driven by voltages that exceed both power supply rails, thus eliminating concerns over exceeding the common-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages. The LM6132/34 can also drive large capacitive loads without oscillating. Operating on supplies from 2.7V to over 24V, the LM6132/34

Simulation Model

Specifications:

Amplifier Type: Rail - Rail Input / Output (RRIO)
Bandwidth: 10 MHz
Base Number: 6132
Gain Bandwidth: 7.4 MHz
I/O Type: Rail-Rail I/O
IC Generic Number: 6132
Input Offset Voltage Max: 8 V
Logic Function Number: 6132
Mounting Type: SMD
Number of Amplifiers: 2
Number of Pins: 8
Op Amp Type: Low Power
Operating Temperature Range: -40°C to +85°C
Operational Amplifier Features: Rail-to-Rail Input/Output
Package / Case: SOIC
SVHC: No SVHC (15-Dec-2010)
Slew Rate: 14 V/µs
Supply Voltage + Nom: 5 V
Supply Voltage Range: 2.7 V to 24 V

RoHS: Yes

Accessories:

Dow Corning - 2265931
Fischer Elektronik - ICK SMD A 5 SA
Fischer Elektronik - WLK 5
Roth Elektronik - RE932-01