Datasheet Microchip MIC3809 The MIC3808 and MIC3809 are a family of complementary output push-pull PWM control ICs that feature high speed and low power consumption Datasheets- Download » Datasheet, PDF, 149 Kb, Revision: 11-09-2015
MIC3808/3809 - Push-Pull PWM Controller Docket ↓MIC3808/3809 Micrel MIC3808/3809 Push-Pull PWM Controller General Description Features The MIC3808 and MIC3809 are a family of complementary output push-pull PWM control ICs that feature high speed and low power consumption. The MIC3808/9 are ideal for telecom level (36V to 75V) isolated step down dc/dc conversion applications where high output current, small size, and high efficiency are required. The dual-ended push-pull architecture of the MIC3808/9 allows more efficient utilization of the transformer than singleended topologies, allowing smaller size dc/dc solutions. Additionally, the out-of-phase push-pull topology allows a higher effective duty cycle, reducing input and output ripple as well as stress on the external components. The dead-time between the two outputs is adjustable between 60ns to 200ns, limiting the duty cycle of each output stage to less than 50%. The MIC3808/9 are built on a low-power, high-speed BiCMOS process. The 130ВµA start-up current and 1mA run-current reduce the size of the start-up circuitry and allow high efficiency even at light loads. The high-speed internal 4MHz error amplifier allows MIC3808/9 operation up to 1MHz. The MIC3808 has a turn-on threshold of 12.5V whereas the MIC3809 has a lower turn-on threshold of 4.3V. Both devices are available in SOP-8 and MSOP-8 package options with an ...
Prices
Status | MIC3809YM | MIC3809YM-TR | MIC3809YMM | MIC3809YMM-TR |
---|
Lifecycle Status | Production (Appropriate for new designs but newer alternatives may exist) | Production (Appropriate for new designs but newer alternatives may exist) | Production (Appropriate for new designs but newer alternatives may exist) | Production (Appropriate for new designs but newer alternatives may exist) |
---|
|
PackagingParametrics | MIC3809YM | MIC3809YM-TR | MIC3809YMM | MIC3809YMM-TR |
---|
Current Limit / Short Circuit Protection | True | True | True | True |
---|
Duty Cycle Max, % | 0.49 | 0.49 | 0.49 | 0.49 |
---|
Input UVLO Typ, V | 4.3 | 4.3 | 4.3 | 4.3 |
---|
Internal Voltage Bias | True | True | True | True |
---|
Maximum Input Voltage, V | 15 | 15 | 15 | 15 |
---|
Minimum Input Voltage, V | 4.1 | 4.1 | 4.1 | 4.1 |
---|
Operating Frequency, Hz | Adj. to 1M | Adj. to 1M | Adj. to 1M | Adj. to 1M |
---|
Operating Supply Current, mA | 1 | 1 | 1 | 1 |
---|
Operating Temperature Range, °C | -40 to +85 | -40 to +85 | -40 to +85 | -40 to +85 |
---|
Soft Start | True | True | True | True |
---|
Supported Outputs | 1 | 1 | 1 | 1 |
---|
Supported Topologies | Push-Pull, Half Bridge, Full Bridge | Push-Pull, Half Bridge, Full Bridge | Push-Pull, Half Bridge, Full Bridge | Push-Pull, Half Bridge, Full Bridge |
---|
Eco PlanOther OptionsMIC3808 Moldel LineSeries: MIC3809 (4) Manufacturer's Classification- Power Management > PWM Controllers > Flyback/Fwd/Push-Pull Products
|
|