Datasheet Microchip MIC22200
The MIC22200 is a high efficiency, 2A integrated switch synchronous buck (step-down) regulator
- Download » Datasheet, PDF, 1.1 Mb, Revision: 11-05-2015
MIC22200 - 2A Integrated Switch Synchronous Buck Reg with Freq Programmable
2A Integrated Switch Synchronous
Buck Regulator with Frequency
Programmable from 800kHz to 4MHz General Description Features The Micrel MIC22200 is a high-efficiency, 2A integrated
switch synchronous buck (step-down) regulator. The
MIC22200 switching frequency is programmable from
800kHz to 4MHz, allowing the customer to optimize their
designs either for efficiency or for the smallest footprint.
The regulator achieves efficiencies as high as 95% while
still switching at 1MHz over a broad load range.
The ultra high-speed control loops keep the output voltage
within regulation even under the extreme transient load
swings commonly found in FPGAs and low-voltage ASICs.
The output voltage can be adjusted down to 0.7V to
address all low-voltage power needs.
The MIC22200 offers a full range of sequencing and
tracking options. The EN/DLY pin, combined with the
Power-On-Reset (POR) pin, allows multiple outputs to be
sequenced in many ways during turn on and turn off. The
RC (ramp control) pin allows the device to be connected to
another device in the MIC22X00 family of products to keep
the output voltages within a certain delta V on start up.
|Lifecycle Status||Production (Appropriate for new designs but newer alternatives may exist)|
|# of Outputs||1|
|Duty Cycle Max, %||1|
|Input Voltage Range, V||2.6 - 5.5|
|Light Load Efficiency Mode||No|
|Operating Temperature Range, °C||-40 to +125|
|Output Current, mA) Max||3000|
|Output Voltage Range, V||0.7 - 5.5|
|Quiescent Current, mA) type||1.2|
|Regulator Type||Step Down (Buck)|
|SHUTDOWN Current, µA||3.7|
- Power Management > Switching Regulators > Step Down up to 6V