RadioLocman.com Electronics ru
Advanced Search +
  

Datasheet Microchip MIC2775-29YM5-TR

ManufacturerMicrochip
SeriesMIC2775
Part NumberMIC2775-29YM5-TR

The MIC2775 is a power supply supervisor that provides undervoltage monitoring, manual reset capability, and power-on reset generation in a compact 5-pin SOT package

Datasheets

  • Download » Datasheet PDF, 317 Kb, Revision: 11-09-2015
    MIC2775 - Micro-Power Voltage Supervisor
    Docket ↓
    MIC2775
    Micro-Power Voltage Supervisor
    IttyBitty® General Description Features The MIC2775 is a power supply supervisor that provides
    undervoltage monitoring, manual reset capability, and
    power-on reset generation in a compact 5-pin SOT
    package. Features include an undervoltage detector, a
    delay generator, a manual reset input, and both activehigh and active-low reset outputs. The undervoltage
    detector compares VDD against a fixed threshold. Ten
    factory-programmed thresholds are available. The reset outputs are asserted for no less than 140ms at
    power-on and any time the input voltage drops below the
    reference voltage. It remains asserted for the timeout
    period after the input voltage subsequently rises back
    above the threshold boundary. A reset can be generated
    at any time by asserting the manual reset input, /MR. This
    reset output will remain active at least 140ms after the
    release of /MR. The /MR input can also be used to daisychain the MIC2775 onto existing power monitoring circuitry
    or other supervisors. Hysteresis is included to prevent
    chattering due to noise. Typical suppy current is an ultralow 3.5µA.
    Datasheets and support documentation are available on
    Micrel’s website at: www.micrel.com. Monitors power supply for undervoltage conditions
    Choice of factory-programmed thresholds
    Generates 140ms (minimum) power-on reset pulse
    Manual reset capability ...

Prices

Status

Lifecycle StatusProduction (Appropriate for new designs but newer alternatives may exist)

Packaging

PackageSOT-23
Pins5

Parametrics

Manual ResetYes
Nominal Reset Voltage1.69, 2.25, 2.34, 2.53, 2.67, 2.81, 2.93, 3.09, 4.43, 4.68 V
Operating Temp. Range-40 to 85 °C
Operating Temperature Range-40 to +85 °C
OutputPush-Pull
Power FailNo
Product TypeSupervisor
Reset TypeActive Low/High or High/Low
Typical Reset Pulse Width140 ms
Typical Supply Current5 µA
VCC Range1.5 - 5.5 V
Watchdog TimerNo

Eco Plan

RoHSCompliant

Moldel Line

Series: MIC2775 (11)

Manufacturer's Classification

  • Power Management > Voltage Detectors

Other Names:

MIC277529YM5TR, MIC2775 29YM5 TR

Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus