» Datasheets » Supervisors

Datasheet Microchip MIC809TUY-TR

Manufacturer	Microchip
Series	MIC809
Part Number	MIC809TUY-TR

The MIC809 and MIC810 are inexpensive microprocessor supervisory circuits that monitor power supplies in microprocessor based systems

Datasheets

Download » Datasheet PDF, 602 Kb, Revision: 11-09-2015
MIC809/810 Data Sheet
Docket ↓
MIC809/810
Microprocessor Reset Circuits General Description Features The MIC809 and MIC810 are inexpensive microprocessor
supervisory circuits that monitor power supplies in
microprocessor-based systems. Precision voltage monitor for 3V, 3.3V, or 5V power
supplies /RESET remains valid with VCC as low as 1.4V for
SOT-23 packaged part /RESET remains valid with VCC as low as 1V for
SC70-packaged part Typically less than 15ОјA supply current for SOT-23
packaged part 5ВµA (typical) supply current for SC70-packaged part 140ms (minimum) reset pulse widths available Available in 3-pin SOT-23 and SC-70 package The function of these devices is to assert a reset if the
power supply drops below a designated reset threshold
level. Several different reset threshold levels are available
to accommodate 3V, 3.3V or 5V powered systems.
The MIC809 has an active-low /RESET output, while the
MIC810 offers an active-high RESET output. The reset
output is guaranteed to remain asserted for a minimum of
140ms after VCC has risen above the designated reset
threshold level. Having a push-pull output stage, the
MIC809/810 does not require a pull-up resistor at the
output. The MIC809/810 comes in a 3-pin SOT-23 and
SC-70 package.
The MIC809 is also available with a shorter reset timeout
(30ms, minimum).
Datasheets and support documentation are available on
MicrelвЂ™s web site at: www.micrel.com. Applications Portable equipment ...

Prices

Status

Lifecycle Status	Production (Appropriate for new designs but newer alternatives may exist)

Packaging

Package	SOT-23
Pins	3

Parametrics

Manual Reset	No
Nominal Reset Voltage	2.63, 2.93, 3.08, 4.00, 4.38, 4.63 V
Operating Temp. Range	-40 to 85 °C
Operating Temperature Range	-40 to +85 °C
Output	Push-Pull
Power Fail	No
Product Type	Supervisor
Reset Type	Active Low
Typical Reset Pulse Width	140 ms
Typical Supply Current	5 µA
VCC Range	1.4 - 5.5 V
Watchdog Timer	No