Datasheet Microchip MIC2040-1YMM The MIC2040 and MIC2041 are high side MOSFET switches optimized for general purpose power distribution applications that require circuit protection Datasheets- Download » Datasheet, PDF, 650 Kb, Revision: 11-05-2015
MIC2040/41 - Single Channel Low Voltage Power Distribution Switch
Docket ↓MIC2040/2041 Micrel MIC2040/2041
Single Channel Low Voltage Power Distribution Switch General Description Features The MIC2040 and MIC2041 are high side MOSFET switches
optimized for general purpose power distribution applications
that require circuit protection. The devices switch up to 5.5V
and as low as 0.8V while offering both programmable current
limiting and thermal shutdown to protect the device and the
load. A fault status output is provided in order to detect
overcurrent and thermal shutdown fault conditions. Both
devices employ soft start circuitry to minimize the inrush
current in applications that employ highly capacitive loads.
Additionally, the MIC2040/41 is suited for multi-port USB
applications to satisfy upstream/downstream power requirements.
The MIC2041 features a auto-reset circuit breaker mode that
latches the output off upon detecting an overcurrent condition
lasting more than 28ms. The output is reset by removing or
reducing the load.
Data sheets and support documentation can be found on
Micrel’s web site at www.micrel.com. 75mΩ max. on-resistance
0.8V to 5.5V operating range
Adjustable current limit
Up to 1.5A continuous output current
Short circuit protection with thermal shutdown
Circuit breaker mode (MIC2041) ...
PricesStatus| Lifecycle Status | Production (Appropriate for new designs but newer alternatives may exist) |
|---|
PackagingParametrics| Adj Current Limit | Yes |
|---|
| Current Limit Adj# | 1.5A Max |
|---|
| Current Limited | Yes |
|---|
| Enable Logic | Active High |
|---|
| Fault Flag | Yes |
|---|
| Flag Transient Filter | Yes |
|---|
| Oja | 160 C/W |
|---|
| Operating Temperature Range | -40 to +85 °C |
|---|
| Product Type | USB Power Dist |
|---|
| RDS ON @5V | 75 mО© |
|---|
| Rev Block Diode | Yes |
|---|
| Switch Element | N-Ch |
|---|
| Thermal Shutdown | Yes |
|---|
| Type | Single |
|---|
| UL Approved | Yes |
|---|
| UVLO | Yes |
|---|
| Vin Max | 5.5 V |
|---|
| Vin Min | 0.8 V |
|---|
Eco PlanOther OptionsMIC2041 Moldel LineSeries: MIC2040 (4) Manufacturer's Classification- Power Management > Power Switches > Power Switches - Current Limit Switches
Other Names:MIC20401YMM, MIC2040 1YMM Related datasheets: - Datasheet Microchip MIC2040
- Datasheet ADMP441 - Analog Devices MIC, MEMS, OMNI-DIR, 9LGA
- Datasheet ADMP504 - Analog Devices MIC, MEMS, OMNI-DIR, 3LGA
- Datasheet ADMP504ACEZ - Analog Devices MIC, MEMS, OMNI-DIR, 3LGA
- Datasheet ADMP405ACEZ-RL7 - Analog Devices MIC, MEMS, OMNI-DIR, ANALOG, 3LGA
|
|
