Datasheet Microchip MIC94094YMT-TR | Manufacturer | Microchip | | Series | MIC94094 | | Part Number | MIC94094YMT-TR |
The MIC94090/1/2/3/4/5 is a family of high-side load switches designed for operation from 1 Datasheets- Download » Datasheet PDF, 836 Kb, Revision: 11-09-2015
MIC94090/1/2/3/4/5 Data Sheet
Docket ↓MIC94090/1/2/3/4/5
High Side Load Switches for
Consumer Applications General Description Features The MIC94090/1/2/3/4/5 is a family of high-side load switches
designed for operation from 1.7V to 5.5V input voltage. The
load switch pass element is an internal 130mΩ RDS(ON) Pchannel MOSFET which enables the device to support up to
1.2A continuous current. Additionally, the load switch
supports 1.5V logic level control and shutdown features.
The MIC94090 and MIC94091 feature rapid turn on. The
MIC94092 and MIC94093 provide a slew rate controlled softstart turn-on of 790Вµs, while the MIC94094 and MIC94095
provide a slew rate controlled soft-start turn-on of 120Вµs. The
soft-start feature option prevents an in-rush current event
from pulling down the input supply voltage.
The MIC94091, MIC94093, and MIC94095 include a 250Ω
auto discharge load circuit that is switched on when the load
switch is disabled.
An active pull-down on the enable input keeps the
MIC94090/1/2/3/4/5 in a default OFF state until the enable pin
is pulled above 1.25V. Internal level shift circuitry allows low
voltage logic signals to switch higher supply voltages. The
enable voltage can be as high as 5.5V and is not limited by
the input voltage.
The MIC94090/1/2/3/4/5 operating voltage range makes
them ideal for Lithium ion and NiMH/NiCad/Alkaline battery ...
PricesStatus| Lifecycle Status | Production (Appropriate for new designs but newer alternatives may exist) |
|---|
PackagingParametrics| Enable Logic | High True |
|---|
| Max SW Current | 1.2 A |
|---|
| Oja | 240, 140 C/W |
|---|
| Operating Temperature Range | -40 to +125 °C |
|---|
| Product Type | Single High-Side Load Switches |
|---|
| RDS ON @5V | 130 mО© |
|---|
| Soft Start | 120 µS |
|---|
| VEN | 1.25 V |
|---|
| Vin Max | 5.5 V |
|---|
| Vin Min | 1.7 V |
|---|
Eco PlanOther OptionsMIC94090 MIC94091 MIC94092 MIC94093 MIC94095 Moldel LineSeries: MIC94094 (2) Manufacturer's Classification- Power Management > Power Switches > Power Switches - Load Switches
Other Names:MIC94094YMTTR, MIC94094YMT TR Related datasheets: - Datasheet ADMP441 - Analog Devices MIC, MEMS, OMNI-DIR, 9LGA
- Datasheet ADMP504 - Analog Devices MIC, MEMS, OMNI-DIR, 3LGA
- Datasheet ADMP504ACEZ - Analog Devices MIC, MEMS, OMNI-DIR, 3LGA
- Datasheet ADMP405ACEZ-RL7 - Analog Devices MIC, MEMS, OMNI-DIR, ANALOG, 3LGA
- Datasheet ADMP404ACEZ-RL7 - Analog Devices MIC, MEMS, OMNI-DIR, ANALOG, 3LGA
|
|
