Datasheet Intersil CD4098BDMSR

DATASHEET
CD4098BMS FN3332
Rev 0.00
December 1992 CMOS Dual Monostable Multivibrator Features Description High Voltage Type (20V Rating) CD4098BMS dual monostable multivibrator provides stable
retriggerable/resettable one shot operation for any fixed voltage timing application. Retriggerable/Resettable Capability Trigger and Reset Propagation Delays Independent of
RX, CX Triggering from Leading or Trailing Edge Q and Q Buffered Outputs Available Separate Resets Wide Range of Output Pulse Widths 100% Tested for Quiescent Current at 20V 5V, 10V and 15V Parametric Ratings Standardized Symmetrical Output Characteristics Maximum Input Current of 1пЃ­A at 18V Over Full Package Temperature Range; 100nA at 18V and +25oC Noise Margin (Over Full Package/Temperature Range)
-1V at VDD = 5V
-2V at VDD = 10V
-2.5V at VDD = 15V Meets All Requirements of JEDEC Tentative Standard
No. 13B, “Standard Specifications for Description of
�B’ Series CMOS Devices” Applications An external resistor (RX) and an external capacitor (CX)
control the timing for the circuit. Adjustment of RX and CX
provides a wide range of output pulse widths from the Q and
Q terminals. The time delay from trigger input to output
transition (trigger propagation delay) and the time delay from
reset input to output transition (reset propagation delay) are
independent of RX and CX.
Leading edge triggering (+TR) and trailing edge triggering
(-TR) inputs are provided for triggering from either edge of
an input pulse. An unused +TR input should be tied to VSS.
An unused -TR input should be tied to VDD. A RESET (on
low level) is provided for immediate termination of the output
pulse or to prevent output pulses when power is turned on. …