RadioLocman.com Electronics ru
Advanced Search +
  

Datasheet Intersil IS9-1715ARH/PROTO

ManufacturerIntersil
SeriesIS-1715ARH
Part NumberIS9-1715ARH/PROTO

Radiation Hardened Complementary Switch FET Driver

Datasheets

  • Download » Datasheet PDF, 316 Kb, Revision: 2017-12-21
    IS-1715ARH, IS-1715AEH Datasheet
    Docket ↓
    DATASHEET
    IS-1715ARH, IS-1715AEH FN4875
    Rev.2.00
    Dec 21, 2017 Radiation Hardened Complementary Switch FET Drivers The radiation hardened IS-1715ARH and IS-1715AEH
    are high speed, high current, complementary power FET
    drivers designed for use in synchronous rectification
    circuits. Soft switching transitions for the two output
    waveforms can be managed by setting the independently
    programmable delays. Alternatively, the delay pins can
    be configured for zero-voltage sensing to allow for
    precise switching control. Features Electrically screened to SMD #5962-00521 QML qualified per MIL-PRF-38535 requirements Radiation environment Gamma dose 3x105rad(Si) Latch-up immune The IS-1715ARH and IS-1715AEH have a single input,
    which is PWM and TTL compatible, and can run at
    frequencies up to 1MHz. The AUX output switches
    immediately at the rising edge of the INPUT, but waits
    for the T2 delay before responding to the falling edge. A
    logic low on the enable pin (ENBL) places both outputs
    into an active-low mode, and an Undervoltage Lockout
    (UVLO) function is set at 9V (maximum). PWR output current (source and sink): 3A (peak) These devices are constructed with the Intersil
    dielectrically isolated Rad Hard Silicon Gate (RSG)
    process and are immune to Single Event Latch-Up
    (SEL). They have been specifically designed to provide
    highly reliable performance in harsh radiation
    environments. Both outputs active-low in Sleep mode AUX output current (source and sink): 3A (peak) Low operating supply current: 6mA (max) Wide programmable delay range: 100ns to 600ns Configurable for zero-voltage switching Switching frequency to 1MHz 9V (maximum) UVLO Related Literature For a full list of related documents, visit our website IS-1715ARH, IS-1715AEH product pages Applications Synchronous rectification in power supplies ...

Prices

Packaging

Package16 Ld CFP
Package IndexK16.A

Parametrics

ClassV, Q, /PROTO
DLA SMD5962-00521
DescriptionRadiation Hardened Complementary Switch FET Driver
High Dose Rate (HDR) krad(Si)300
Operating Temperature Range-55 to 125
Qualification LevelQML Class Q (military), QML Class V (space)
SEL (MeV/mg/cm2)SEL free

Eco Plan

RoHSCompliant

Other Options

IS-1715AEH

Moldel Line

Series: IS-1715ARH (5)

Manufacturer's Classification

  • Space & Harsh Environment > Rad Hard Power > RH MOSFET Drivers

Other Names:

IS91715ARH/PROTO, IS9 1715ARH/PROTO

Slices ↓
Radiolocman facebook Radiolocman twitter Radiolocman google plus