Datasheet Texas Instruments THS4121ID

ManufacturerTexas Instruments
SeriesTHS4121
Part NumberTHS4121ID
Datasheet Texas Instruments THS4121ID

3.3 V, 100 MHz, 43 V/us, Fully Differential CMOS Amplifier 8-SOIC -40 to 85

Datasheets

THS4120, THS4121: High-Speed Fully Differential-I/O Amplifier datasheet
PDF, 1.1 Mb, Revision: D, File published: Oct 13, 2004
Extract from the document

Prices

Status

Lifecycle StatusActive (Recommended for new designs)
Manufacture's Sample AvailabilityYes

Packaging

Pin8
Package TypeD
Industry STD TermSOIC
JEDEC CodeR-PDSO-G
Package QTY75
CarrierTUBE
Device Marking4121I
Width (mm)3.91
Length (mm)4.9
Thickness (mm)1.58
Pitch (mm)1.27
Max Height (mm)1.75
Mechanical DataDownload

Parametrics

2nd Harmonic79 dBc
3rd Harmonic93 dBc
@ MHz1
Acl, min spec gain1 V/V
Additional FeaturesN/A
ArchitectureCMOS,Fully Differential,Voltage FB
BW @ Acl100 MHz
CMRR(Min)64 dB
CMRR(Typ)96 dB
GBW(Typ)100 MHz
Input Bias Current(Max)1.2 pA
Iq per channel(Max)13.5 mA
Iq per channel(Typ)11 mA
Number of Channels1
Offset Drift(Typ)25 uV/C
Operating Temperature Range-40 to 85,0 to 70 C
Output Current(Typ)25 mA
Package GroupSOIC
Package Size: mm2:W x L8SOIC: 29 mm2: 6 x 4.9(SOIC) PKG
Rail-to-RailIn to V+,Out
RatingCatalog
Slew Rate(Typ)55 V/us
Total Supply Voltage(Max)3.5 +5V=5, +/-5V=10
Total Supply Voltage(Min)3 +5V=5, +/-5V=10
Vn at 1kHz(Typ)16 nV/rtHz
Vn at Flatband(Typ)5.4 nV/rtHz
Vos (Offset Voltage @ 25C)(Max)8 mV

Eco Plan

RoHSCompliant

Design Kits & Evaluation Modules

  • Evaluation Modules & Boards: THS4140EVM
    THS4140EVM Evaluation Module
    Lifecycle Status: Active (Recommended for new designs)

Application Notes

  • Fully-Differential Amplifiers (Rev. E)
    PDF, 867 Kb, Revision: E, File published: Sep 19, 2016
    Differential signaling has been commonly used in audio, data transmission, and telephone systems for many years because of its inherent resistance to external noise sources. Today, differential signaling is becoming popular in high-speed data acquisition, where the ADC’s inputs are differential and a differential amplifier is needed to properly drive them.Two other advantages of di
  • High-Voltage Signal Conditioning for Differential ADCs
    PDF, 125 Kb, File published: Jun 14, 2004
    Analog designers are frequently required to convert high-voltage signals to levels acceptable to low-voltage data converters with differential inputs. This paper describes solutions for this common task using modern amplifiers and typical power supplies. Three examples of conditioning В±10V bipolar signals for low-voltage analog-to-digital converters (ADCs) are shown: a single-supply design,
  • Noise Analysis for High Speed Op Amps (Rev. A)
    PDF, 256 Kb, Revision: A, File published: Jan 17, 2005
    As system bandwidths have increased an accurate estimate of the noise contribution for each element in the signal channel has become increasingly important. Many designers are not however particularly comfortable with the calculations required to predict the total noise for an op amp or in the conversions between the different descriptions of noise. Considerable inconsistency between manufactu

Model Line

Manufacturer's Classification

  • Semiconductors > Amplifiers > Operational Amplifiers (Op Amps) > High-Speed Op Amps (>=50MHz)
EMS supplier